Narrow down by specifying conditions
There are currently 4292 hits.
Analog Devices AD Converter : What should I do if the AD7124 does not output (Dout) due to SPI communication?
The AD7124 has internal diagnostic functions. Use the ERROR_EN register and check if there is an alert about SPI communication from the error register. At that time, you need to set CS_EN to 1 and use the CS signal.
(Published in March 2022)
Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.