Analog Devices Switching Regulator: The recommended FB resistor for the 15V output of the LTM8065 seems to be 16.9kΩ in Table.1 of the data sheet, but the value based on the calculation formula is 17.2kΩ. Which is correct?

Narrow down by specifying conditions

There are currently 4342 results.

Analog Devices Switching Regulator: The recommended FB resistor for the 15V output of the LTM8065 seems to be 16.9kΩ in Table.1 of the datasheet, but the value based on the formula is 17.2kΩ. which one is correct?

power management

Both are correct. The values in the datasheet Table.1 indicate resistor values selected from the E48 series. The formula is more accurate, but requires the use of E192 series resistors. Please select from the easy-to-use resistor series.

(Published in February 2022)

Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search