Narrow down by specifying conditions
There are currently 4292 hits.
Analog Devices Automotive Audio Bus (A2B) : What are the recovery conditions for the master device (AD2428W) when the SYNC of the I2S signal from the HOST to the master device (AD2428W) is stopped during operation of the AD2428W?
Supply the SYNC signal again, and after tPLK (PLL LOCK TIME) has elapsed, perform all register initialization again. POR (Power On Reset) that turns VIN from OFF to ON is unnecessary. Please check the illustration below.
(Published in April 2021)
If the problem persists
Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.