Narrow down by specifying conditions
There are currently 4292 hits.
Analog Devices Switching Regulator: What should I be careful about when the input voltage is 3.3V when using the LTM4622?
In this case, it is necessary to input 3.3V to INTVCC and VIN1/VIN2.
(See the “Low Input Voltage Applications” chapter on page 13 of the datasheet.)
At this time, pay attention to the accuracy of the input voltage of 3.3V.
See SYMBOL : VIN_3.3 in “Electrical Characteristics” on page 2 of the datasheet.
At this time, Min: 3.1V, Max: 3.5V are stipulated, so please be careful.
For the circuit diagram for your reference, please refer to the circuit diagram in Fig. 27 on page 22.
If the problem persists
Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.