Analog Devices Sensors and MEMS: The EXT_CLK bit in the TIMING register was set to 1 to allow the ADXL372 to use an external clock. At this time, is it correct to understand that if a 614.4KHz clock is input to INT1, an ODR (Output Data Rate) of 6.4KHz will be obtained?

Narrow down by specifying conditions

There are currently 4332 hits.

Analog Devices Sensors and MEMS: Set the EXT_CLK bit in the TIMING register to 1 to allow the use of an external clock for the ADXL372. At this time, is it correct to understand that if a 614.4KHz clock is input to INT1, an ODR (Output Data Rate) of 6.4KHz is obtained?

Sensors and MEMS

Yes, as you know, there is no problem.

If the problem persists

Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search

If the problem persists