Analog Devices Switching Regulator: Please tell me about the output of the LTM8001 evaluation board (DC1818A). It seems that VOUT2 and 3 and VOUT4 and 5 are shorted and operated in parallel. Is it possible to cut these patterns and use them as independent outputs?

Narrow down by specifying conditions

There are currently 4342 results.

Analog Devices Switching Regulator : Tell me about the output of the LTM8001 evaluation board (DC1818A). It seems that VOUT2 and 3 and VOUT4 and 5 are shorted and run in parallel. Is it possible to cut these patterns and use them as independent outputs?

power management

Yes. It is possible.

After disconnecting, change the resistance value of each SET PIN. Also, be careful of the maximum load current that can flow per channel. Please see the data sheet for details.

If the problem persists

Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search

If the problem persists