Analog Devices Switching Regulator: For the LT3471, does the typical application circuit on the top page of the datasheet produce zero output VOUT when the SHDN input is at a low level?

Narrow down by specifying conditions

現在 4342 件がヒットしています。

Analog Devices Switching Regulator: For the LT3471, does the Typical Application Circuit on the top page of the datasheet say that when the SHDN input is at a low level, the output VOUT is zero?

power management

The boost circuit is connected to VIN through a diode and an inductor, so when shut down, the output voltage will drop from the 3.3V of VIN to the VF of the diode.

Since the inverting circuit is capacitor-coupled to VIN, no voltage appears (0V) when shut down, but the inductor

DC impedance for positive voltage is low because it is dropped to GND with a diode through.

Article header lt3471 schematics 1 — circuit diagram

If the problem persists

Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search

If the problem persists