Analog Devices A/D converter (ADC): Power specifications are specified as 2.5V - 5.5V. The output accuracy of the power supply used is +/-2%, and the power supply will be 2.45V - 2.55V. The voltage is 0.05V below the lower limit of 2.5V, can I use it without any problems?

Narrow down by specifying conditions

There are currently 4341 results.

Analog Devices A/D Converters (ADCs): Power specifications are specified as 2.5V - 5.5V. The power supply you are using has an output accuracy of +/-2% and you end up with a power supply of 2.45V - 2.55V. It is 0.05V lower than the lower limit of 2.5V, but can it be used without problems?

A/D converter (ADC)

No, I am very sorry. The power supply range that can guarantee the characteristics of the data sheet is 2.5V to 5.5V.
Operation is not guaranteed when the power supply voltage is 2.45V, so please use it within the range of 2.5V to 5.5V.

If the problem persists

Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search

If the problem persists