Comet A65 SOM Evaluation Kit
Evaluation and development kit using Comet A65 SOM:
The Comet A65 SOM Evaluation Kit is a kit designed to support the evaluation and development of the high-performance SOM "Comet A65 SOM" equipped with Altera® Agilex™ 5 SoC FPGA. It features 12GB of LPDDR4 memory, abundant I/O, and eMMC storage, making it suitable for industrial applications such as medical devices, robotics, and smart cities. The included carrier board features various connectors including SEAM8 and ADF6, and offers comprehensive management functions such as power and temperature monitoring and automatic fan control. Rapid prototyping is possible by utilizing both FPGA and HPS interfaces. Furthermore, a free license for Altera® Quartus® Pro Edition is included, allowing you to start development immediately.
specification
SOM:
|
Categories |
Item |
spec |
| system | FPGA | A5ED065BB32AE4SR0 (Agilex™ E-Series Group B) *Group A compatible |
| module size | 75mm × 75mm | |
| HVIO | 102 (3.3V x 4, 1.8/2.5/3.3V x 98) | |
| HSIO | 143 pieces (71 LVDS) | |
| HPS IO | 48 bottles | |
| transceiver | 24 bottles | |
| interface | SEAM8 connector ×2 (100 pins each) | |
| Management function | Power and temperature monitoring, automatic fan control, automatic shutdown in case of abnormality. | |
| FPGA side | LED / KEY | LED ×1、KEY ×1 |
| clock | Fixed 50/100MHz, reference clock generator for transceivers | |
| LPDDR4-A | 4GB (32-bit, no ECC) *Shared with HPS | |
| LPDDR4-B | 4GB (32-bit, non-ECC) | |
| LPDDR4-C | 4GB (32-bit, non-ECC) | |
| I/O connection | HVIO (102-pin), HSIO (143-pin) → SEAM8 connection | |
| Transceiver connection | 24 wires + 4 reference clock wires → SEAM8 6 connector connection | |
| HPS side | LPDDR4-A | 4GB (32-bit, no ECC) *Shared with FPGA |
| HPS IO | 48 wires → ADF6 connector connection | |
| storage | 8GB eMMC (expandable), with eMMC SEL switch |
Carrier board:
|
Categories |
Item |
spec |
| system | PCIe form factor | Full height, half length |
| Power input | 12V DC jack or PCIe edge | |
| interface | SEAF8 connector ×2 (40 × 100 pins each) | |
| FPGA side | PCIe | Gen4 x4 (x8 edge) |
| Video Output | HDMI(1080P) | |
| Network | QSFP+ port ×1 (40GbE) | |
| MIPI | 4-lane MIPI connector x2 (for camera/display) | |
| High-speed I/O | 60-pin high-speed connector | |
| GPIOs | 3.3V 2x20 DE-GPIO header | |
| Ethernet | 2.5G Ethernet + RJ45 | |
| clock input | SMA x2 (differential clock) | |
| HPS side | storage | MicroSD Socket |
| UARTs | Type-C connector | |
| Ethernet | Gigabit Ethernet PHY + RJ45 | |
| USB | USB 2.0 OTG(MicroUSB) | |
| Reset | COLD reset button |
Block Diagram
SOM
Carrier board
Layout
TOP (SOM)
Bottom (SOM)
Carrier board: Top image, Bottom image
Contents
① Comet A65 SOM module (Installed)
② Active Heatsink (Installed)
③ Comet A65 Carrier Board
④ MicroSD Card (Installed) + Card Reader
⑤ Type-C USB Cable
⑥ Adapter AC 100-240V 2.5A, DC 12V/7.5A 90Wmax (Level 6)
⑦ AC Power Cord
⑧ Quick Start Guide
Others
Note: The information on this page is based on information available as of the date of creation (August 2025), but we cannot guarantee its accuracy or completeness.