- Semiconductor BusinessHOME
- Products and Services of Macnica,Inc.
-
technical information
-
Events and Seminars
- Handling Manufacturer
- Support
- Inquiry
- Click here to purchase products
- Semiconductor business e-mail magazine registration
Overview
HLS (Hi-speed Link System) is a high-speed field network with a 1-master:multiple-slave configuration.
It can connect up to 63 slave ICs and supports I/O control of up to 2,016 points (1,008 inputs + 1,008 outputs). The communication protocol is built into the IC.
The CPU can control numerous I/O operations simply by reading and writing to memory.
Features
• Ultra-high-speed control (up to 15 μs per node)
- Up to 63 nodes can be connected.
RS485-based multidrop communication
- Simple I/O control with reduced CPU load
- Analog control is also supported (when using units from partner manufacturers).
- Equipped with error detection and notification functions.
|
series name |
Master (Center) IC |
Master (Center) IC |
Master (Center) IC |
slave (Satellite) IC |
| Model number |
MKY36 |
MKY39-1 |
MKY39-2 |
MKY37 |
| package | .jpg) |
|
 |
|
| Number of I/Os |
ｰ |
4DIN 4DOUT |
4DIN 4DOUT |
16DIN 16DOUT |
| Operating voltage |
3.3V (5V tolerant) |
3.3V |
3.3V |
5.0V |
| Features | 16/8 bit bus Interface support |
SPI interface compatible SPI clock 16.6MHz (max) |
Includes 2 masters (centers) SPI interface compatible SPI clock 16.6MHz (max) |
No CPU required |
.jpg)
.jpg)
Network Specifications
| Communication method | HLS (Master/Slave Polling) |
| physical layer | RS485 |
| communication speed | 12Mbps / 6Mbps / 3Mbps |
| Communication distance | Maximum distance: 100m to 300m (depending on speed) |
| cable | Shielded cable of Cat5 or higher |
| Maximum number of nodes | 63 nodes |
| topology | Bus configuration (tree and star configurations are possible when using a HUB) |
response speed
In full-duplex communication mode, the following response speeds are achieved even with a maximum of 63 nodes connected.
12Mbps: 955.5μs
6Mbps: 1911μs
3Mbps: 3822μs
In half-duplex communication, the signal strength is approximately doubled.
Control method
The master IC contains the I/O registers for each slave.
- Input acquisition (Read): The CPU simply reads the memory of the master IC.
- Output control (Write): The CPU simply writes to the master IC's memory.
This allows you to control the I/O of each slave. Communication processing is automatically handled by HLS.
Error monitoring function
When a communication error occurs, you can check the following in the registers:
Additionally, the CHK1/CHK2 pins support LED display and interrupt notification.
Which slave was affected?
How many times did the error occur?
Network expansion
・Wiring extension
T-branch
Star wiring
It can handle the above and extend the communication range up to a maximum of 2,400m (3Mbps, 7-stage HUB configuration).
Inquiry / Quotation
For inquiries or price quotes regarding this product, please contact us here.