Product Summary
Si838x is a digital isolator that supports 24V PLC input such as industrial IO and NC.
Like a photocoupler, it does not require a power supply on the input side and operates with +/- bidirectional current input (sink/source input). It has a built-in LED emulator circuit, is easy to change from a photocoupler circuit, and conforms to IEC61131-2 switch types 1, 2, and 3. The output is a 5V logic output. High-speed signal transmission of 1MHz (2Mbps) is possible, and CMTI is 50kV/us (typ) for robustness. The OOK method is more resistant to noise than latch type products.
A higher CMTI of 300KV/us (typ) can be obtained with the built-in input debounce filter. In addition, there is an optional product that allows you to develop a PLC that supports up to 16 units and 128 channels with one SPI.
Product features
- Driven by 8ch bi-directional (sink/source) current input, no power supply required on the input side
- Input side 24V withstand voltage Compliant with IEC61131-2 etc.
- Little change in characteristics due to temperature, long life
- High speed channel 1MHz(2Mbps)
- Built-in debounce filter (4us 250Kbps) plus +10ms, 30ms, 100ms Low Pass Filter options
- High CMTI 50KV/us (typ) Higher CMTI 300KV/us (typ) with built-in debounce filter
- Built-in output UVLO
- Dielectric strength UL1577 2.5KVrms
Unlike photocouplers, there is no need to calculate CTR considering deterioration over time. The temperature characteristics and aging change are small, and the design can be performed with little variation between channels. A diode bridge is included to accommodate sink/source inputs.
Product lineup
part number | Output IF | Low Ch / Fast Ch |
LPF | package | Dielectric strength |
Si8380S-IU | Serial | 8/0 | 0 ms | 20-QSOPs | 2.5kV RMS |
Si8380P-IU | Parallel | 8/0 | 0 ms | ||
Si8382P-IU | Parallel | 6/2 | 0 ms | ||
Si8384P-IU | Parallel | 4/4 | 0 ms | ||
Si8388P-IU | Parallel | 0/8 | ー | ||
Si8380PF-IU | Parallel | 8/0 | 10ms | ||
Si8380PM-IU | Parallel | 8/0 | 30ms | ||
Si8380PS-IU | Parallel | 8/0 | 100ms |
Si8380S-IU can change built-in filter setting by register setting
Low-speed Ch=250Kbps (when LPF=0ms), High-speed Ch=2Mbps Total number of channels is 8ch
In addition to the above table, there is a mixed product of high-speed channel and 10ms, 30ms, 100ms LowPassFilter (see data sheet)
Symmetrical application
- I/O of PLCs (Programmable logic controllers)
- Interface for NC and CNC machines
- 24V data line for industry
Evaluation Board
SI838XISO-KIT Si838x PLC Input Isolator Evaluation Kit
The Si838x evaluation board allows easy evaluation of this product family. The evaluation board has three input networks of TYPE1, TYPE2, and TYPE3 conforming to 24VDC IEC61131-2. A 24 V digital logic signal can be applied to the test point labeled "EXT" and signals up to 5 V can be applied to the remaining Ax and AHx test points for evaluation. (Ax is the low speed channel, AHx is the high speed channel)
The board allows easy characterization of the device's key characteristics and allows direct connection to external systems.
UG206: Si838xISO-EVB User's Guide Evaluation Board User Guide
Related Documents
Purchase at Macnica-Mouser
If you want to be the first to buy the product, please buy it from Macnica-Mouser. Click the button below to move to the Macnica-Mouser site.
Inquiry / Quotation
If you have any questions about this product or would like a quote, please contact us below.
To Sky Works Manufacturer Information Top
If you want to return to Skyworks' manufacturer information top page, please click below.