- Semiconductor BusinessHOME
- Products and Services of Macnica,Inc.
-
technical information
-
Events and Seminars
- Handling Manufacturer
- Support
- Inquiry
- Click here to purchase products
- Semiconductor business e-mail magazine registration
Product Summary
Parade Technologies DisPlayPort™ to HDMI™ / DVI Converter products are DisplayPort™ (DP) to HDMI™ video interface converters for cable adapters, television receivers, monitors, and other applications requiring video protocol conversion. It's perfect.
Product main features
- Input is DisplayPort™ v1.4a compliant (PS186)
- Input is DisplayPort™ v2.0 compliant (PS196)
- Output is HDMI™ 2.0b compliant (PS186)
- Output is HDMI™ 2.1 compliant (PS196)
Product lineup
PS171
A DisplayPort™ to HDMI™/DVI converter that receives both video and audio streams from an upstream DisplayPort™ source link and converts them to HDMI™ or DVI output. The HDMI™ transmitter is HDMI™ 1.4b compliant and supports video formats with TMDS clock rates up to 300MHz (3.0Gbps TMDS data rate).
Supports active protocol conversion, DisplayPort™ to HDMI™ or DisplayPort™ to DVI DisplayPort™ branching. Provides anonymous automated operation enabled by an integrated microprocessor that uses external SPI ROM for configuration and microcode. The SPI ROM can be field updated through the AUX channel or the device's I2C port. System control is available using a dedicated I2C slave input, and an I2C master interface is available for external EDID and expansion functionality. Integrated HDCP Rx and Tx keys fully support HDCP content protection, including HDCP repeater functionality.
■ Features & block diagram
●General features
- Complete DisplayPortTM receiver for video format conversion
Integrated complete HDMI/DVI transmitter
- Fully compliant HDMI output, up to 300 MHz TMDS clock,
Supports HDMI 1.4 video format
- Fully compliant DisplayPort input, video,
Audio Full HDCP 1.3 Content Protection Support
・Supports RGB of 6/8/10/12 bpc (bits per component)
- Supports YCbCr 4:4:4 and YCbCr 4:2:2 8/10/12 bpc
・Audio input format: 8 channel LPCM,
Compressed audio (AC-3, DTS) and HBR audio formats,
Up to 24-bit audio sample size and 192 kHz sample rate
・Equipped with on-chip microprocessor with SPI ROM interface
・1.2V core power supply and 3.3VI/O power supply
- Supports internal crystal oscillator, external crystal or reference clock
・56-pin QFN package
・ESD:
- HBM connector pin: 8kV
- All other pins: 5kV
●DisplayPort™ receiver function
Supports 1, 2, and 4 lanes at both 1.62Gbps and 2.7Gbps data rates
・Built-in automatic receive equalization
・Supports both full link training and non-link training operations
・Video input format:
- RGB: up to 12bpc
- YCbCr4:4:4 -4:2:2; max. 12bpc
- Supports reduced blanking or reduced refresh rate timing modes
・Audio input format: 8ch LPCM, compressed audio, HBR
・24-bit audio sample size: up to 192kHz sample rate
・Supports DisplayPort™ spread spectrum clocking
●HDMI™/DVI transmitter function
HDMI™ 1.4b transmitter: Supports 3D 1080p and 4K x 2K@30Hz 24-bit color at up to 3.0Gbps
・Video output format:
- RGB: up to 12bpc
- YCbCr4:4:4 -4:2:2: max. 12bpc
・Audio output format: 8ch LPCM, compressed audio, HBR
・24-bit audio sample size: up to 192 kHz sample rate
■ Target applications
・Docking device
- Enabling DisplayPort™ input on the CE device (see image to the right)
・Active protocol DisplayPort™ -to-HDMI™ video adapter (see diagram to the right)
・Active protocol DisplayPort™ -to-DVI video adapter (see diagram to the right)
PS175
A DisplayPort™ (DP) to HDMI™ 2.0a video interface converter optimized for motherboard applications. Designed for use with DP 1.2 or DP 1.3 inputs, it can output HDMI™ 2.0a up to 6Gbps with a maximum allowed TMDS date rate of 4K UHD at 60 fps in 4:4:4 video mode at 24 bpp. Video will be possible.
Provides anonymous automated operation enabled by an integrated microprocessor that uses internal SPI ROM for configuration and microcode. The SPI ROM can be field updated through the DisplayPort™ AUX channel or device I2C slave input. System control is available via an I2C slave input, and an I2C master interface is available for external EDID and expansion functionality. Integrated HDCP Rx and Tx keys fully support both HDCP 1.4 and HDCP 2.3 content protection, including HDCP repeater functionality.
■ Features & block diagram
●General features
・With DisplayPort™ receiver for video format conversion
Integrated HDMI™ 2.0a transmitter
-Uses 4-lane DP 1.2 or DP 1.3 input at HBR2 (5.4Gbps) data rate,
At 60Hz frame rate with 24-bit color and 4:4:4 color sampling
Supports display resolutions up to 4096 x 2160
・Jitter cleaning PLL has wide compliance margin
Provides stable HDMI™ output signal
・HDCP 1.4 and HDCP 2.3 repeater function with on-chip key
・Internal conversion function from YCbCr 4:4:4 /4:2:2 to YCbCr 4:2:0
・Equipped with on-chip microprocessor with built-in SPI ROM
・1.2V core power supply & 3.3V I/O power supply
·Low power consumption
- Supports internal crystal oscillator, external crystal or reference clock
・48-pin 6x6mm QFN package, RoHS halogen-free (internal SPI ROM)
・64-ball 7x7mm TFBGA package, RoHS halogen-free (requires external SPI ROM)
・ESD: 7kV (HBM)
●DisplayPort™ receiver function
-Can accept DisplayPort™ 1.1a, 1.2a, and 1.3
・Supports 1/2/4 lanes at 1.62/2.7/5.4 Gbps per lane
・Supports full link training and no link training operations
- RGB formats supported at 6/8/10/12 bits per component
・YCbCr format is supported in 4:4:4/4:2:2 pixel format at 8/10/12 bpp
・Supports CEC-Tunneling-over-AUX according to DP 1.3
Programmable receiver equalization to compensate for PCB and connector losses
・Audio input format: 8ch LPCM, compressed audio, HBR
・24-bit audio sample size: up to 192 kHz sample rate
・Supports DisplayPort™ spread spectrum clocking
・HDCP 1.3 and HDCP 2.2 content protection, including on-chip keys
●HDMI™/DVI transmitter function
HDMI™ 2.0a transmitter, up to 6.0 Gbps per TMDS data channel
・CEC support with dedicated receptacle interface signals
- RGB formats supported in 8/10/12 bit/component
・YCbCr format is supported in 4:4:4/4:2:2/4:2:0 pixel format at 8/10/12 bpc
・Supports TMDS scrambling for EMI/RFI reduction
・Supports SCDC (Status and Control Data Channel)
・Audio output format: 8ch LPCM, compressed audio, HBR
・24-bit audio sample size: up to 192 kHz sample rate
・HDCP 1.4 and HDCP 2.3 content protection, including on-chip keys
■ Target applications
HDMI™ 2.0a motherboard output source for portable and desktop PC applications
PS176
DisplayPort™ (DP) to HDMI™ 2.0 video interface converter ideal for cable adapters, TV receivers, monitors, and other applications requiring video protocol conversion. Accepts any DisplayPort™ input format including DP 1.1a, DP 1.2a, DP 1.3, or DP 1.4. It can output traditional HDMI™ and DVI video modes as well as HDMI™ 2.0 format. HDMI™ 2.0 is supported up to the maximum allowable TMDS date rate of 6Gbps, allowing 4K UHD video at 60 fps in 4:4:4 video mode at 24 bpp.
Provides anonymous automated operation enabled by an integrated microprocessor that uses internal SPI ROM for configuration and microcode. The SPI ROM can be field updated through the DisplayPort AUX channel or the device I2C slave input. System control is available via an I2C slave input, and an I2C master interface is available for external EDID and expansion functionality. Integrated HDCP Rx and Tx keys fully support both HDCP 1.4 and HDCP 2.3 content protection, including HDCP repeater functionality.
■ Features & block diagram
●General features
・With DisplayPort™ receiver for video format conversion
Integrated HDMI™ 2.0 transmitter
・HBR2 (5.4Gbps) data rate with 4 lanes DP 1.2a, DP 1.3, or
24-bit color and 4:4:4 color sampling using DP 1.4 input,
Supports display resolutions up to 4096 x 2160 at 60 Hz frame rate
・Jitter cleaning PLL has wide compliance margin
Provides stable HDMI output signal
・HDCP 1.4 and HDCP 2.3 repeater function with on-chip key
・Internal conversion function from YCbCr 4:4:4 /4:2:2 to YCbCr 4:2:0
・Equipped with on-chip microprocessor with built-in SPI ROM
・1.2V core power supply & 3.3V I/O power supply
·Low power consumption
- Supports internal crystal oscillator, external crystal or reference clock
・48 pin 6x6mm QFN package, RoHS halogen free
・ESD: 7kV (HBM)
●DisplayPort™ receiver function
Can accept DisplayPort™ 1.1a, 1.2a, or 1.3
・Supports 1/2/4 lanes with 1.62/2.7/5.4 Gps per lane
・Supports full link training and no link training operations
- RGB formats supported at 6/8/10/12 bits per component
・YCbCr format is supported in 4:4:4/4:2:2 pixel format at 8/10/12 bpp
・Supports CEC-Tunneling-over-AUX according to DP 1.3
Programmable receiver equalization to compensate for PCB and connector losses
・Audio input format: 8ch LPCM, compressed audio, HBR
・24-bit audio sample size: up to 192 kHz sample rate
・Supports DisplayPort™ spread spectrum clocking
・HDCP 1.3 and HDCP 2.2 content protection, including on-chip keys
●HDMI™/DVI transmitter function
HDMI™ 2.0 transmitter, up to 6.0 Gbps per TMDS data channel
・CEC support with dedicated receptacle interface signals
- RGB formats supported in 8/10/12 bit/component
- YCbCr format is supported in 4:4:4/4:2:2/4:2:0 pixel format with 8/10/12 bits/component
・Supports TMDS scrambling for EMI/RFI reduction
・Supports SCDC (Status and Control Data Channel)
・Audio output format: 8ch LPCM, compressed audio, HBR
・24-bit audio sample size: up to 192 kHz sample rate
- HDCP 1.4 and HDCP 2.3 content protection, including on-chip keys
■ Target applications
・DisplayPort™ to HDMI™ active protocol converter
・DisplayPort™ Alt Mode over USB Type-C®™ to HDMI™ protocol converter
・Thunderbolt to HDMI™ protocol converter
・HDMI™ output driver for docking station
・DisplayPort™ input on TV receiver
・Monitor DisplayPort™ input
PS181
Accepts a native-only (non-dual-mode) DisplayPort™ input from an upstream source and provides a dual-mode DisplayPort™ output. This supports dual-mode DisplayPort™ video adapters (simple level-shifting type cable adapters) that output DVI or HDMI™ when connected to a dual-mode DisplayPort™ output. When a DisplayPort™ cable is connected to the output, it acts as a DisplayPort™ repeater/redriver, ensuring a compliant DisplayPort™ signal at the output receptacle.
The HDMI™ transmitter is HDMI 1.4b compliant and supports video formats with TMDS clock rates up to 300MHz (3.0Gbps TMDS data rate). It integrates both HDCP Rx and Tx keys for repeater applications. An integrated AUX channel to I2C bridge connection allows access to the DDC port of an HDMI™ /DVI display, allowing you to read EDID or access HDCP directly. Chip control is available through a dedicated I2C slave input, and an I2C master interface is available for external EDID and expansion functionality. Contains an on-chip microprocessor unit (MPU) that supports external SPI ROM updates via I2C or AUX channel commands.
■ Features & block diagram
●General features
・Convert native DisplayPort™ source to dual-mode DisplayPort™ output
・A compliant DisplayPortTM receiver and a compliant HDMI™/DVI transmitter
Integrate and convert video formats
・Full DisplayPort™ redriver functionality in bypass mode
・Full HDCP 1.3 content protection support
・Supports RGB of 6/8/10/12 bpc (bits per component)
- Supports YCbCr 4:4:4 and YCbCr 4:2:2, 8/10/12 bpc
・Audio format: 8 channel LPCM, compressed audio (AC-3, DTS),
Up to 24-bit audio sample size and
HBR audio format with 192 kHz sample rate
・Equipped with on-chip microprocessor with SPI ROM interface
・1.2V core power supply and 3.3VI/O power supply
・56-pin QFN package
・ESD:
- HBM connector pin: 8kV
- All other pins: 5kV
●DisplayPort™ receiver function
・Fully compliant with DisplayPort™ 1.1a
- Supports 1, 2, and 4 lanes at 1.62Gbps and 2.7Gbps
・Supports full link training and no link training operations
・Supports DisplayPort™ spread spectrum clocking
●HDMI™/DVI transmitter function
HDMI 1.4b transmitter, up to 3.0Gbps data rate (300MHz TMDS clock), supports 3D 1080p and 4K x 2K
■ Target applications
Enabling dual-mode DisplayPort sources for native DisplayPort™-only GPUs
・Output drivers for PCs, notebooks, and docking stations
*Refer to the diagram on the right.
PS186
DisplayPort™ v1.4a to HDMI™ 2.0b video interface converter ideal for cable adapters, docking stations, monitors, TV receivers, and other applications requiring video protocol conversion. The input is a DP v1.4a compliant upstream port that accepts audio and display data, and the output is an HDMI™ 2.0b compliant downstream port. In addition to accepting native DisplayPort™, it can also be driven with a USB-C® interface using DisplayPort™ Alt Mode. This is typically supported by USB-C® enabled devices such as Thunderbolt 3 devices and smartphones that include a video source or video passthrough.
Support for DP v1.4a allows it to accept compressed display data using DSC (Display Stream Compression) and link rates up to HBR3 (8.1 Gbps). Using a combination of DSC and HBR3, the PS186 uses two DisplayPort™ mains to provide full HDMI™ 2.0b output display resolution support, including 4K HDR at 24 bpp, 4K 60 fps 4:4:4 video mode. Requires only link lanes. This means only two USB-C® high-speed channels are required for DP Alt Mode, while the other two high-speed channels are available for Gen1 (5Gbps) or Gen2 (10Gbps) SuperSpeed USB data. , which brings benefits to USB-C® interface applications. This feature makes it ideal for USB-C® compatible docking stations, mini docks, or monitors that support both display and USB data.
It provides anonymous automated operation enabled by an integrated microprocessor that uses an inexpensive external SPI ROM for configuration and microcode. The SPI ROM can be field updated through the DisplayPort™ AUX channel or device I2C slave input. System control is also available through an I2C slave input, and an I2C master interface is available for external EDID and expansion functionality. Integrated HDCP Rx and Tx keys fully support both HDCP 1.4 and HDCP 2.3 content protection, including HDCP repeater functionality.
■ Features & block diagram
- Input is DisplayPort v1.4a compliant and supports:
- Link speed: 1.62Gbps (RBR), 2.7Gbps (HBR), 5.4Gbps (HBR2),
and 8.1Gbps (HBR3)
- 1, 2 or 4 lane main link operation
- DPCD 1.4 data structures
- Horizontal blanking extended operation
- VESA® Display Stream Compression Standard (DSC) v1.2a bitstream processing
and FEC policy
- High Dynamic Range (HDR) with CTA-861.3-A via Metadata Transport
- CEC tunneling via AUX
- RGB pixel formats with 6, 8, 10, and 12 bits per component (bpc)
- 4:4:4, 4:2:2, and 4:2:0 YCbCr pixel formats at 8, 10, and 12 bpc
- Up to 8 channels LPCM, compressed audio (AC-3, DTS),
HBR audio format and 192kHz audio frame rate,
Audio up to 24-bit audio sample size
・Output complies with HDMI 2.0b:
- TMDS data rate up to 6Gpbs
- Full resolution up to 4K 60fps using 4:4:4 video mode at 24 bpp
- 4K HDR
- TMDS scrambling for EMI/RFI reduction
- SCDC (Status and Control Data Channel)
・Internal format pixel format conversion function
- YCbCr 4:4:4 to YCbCr 4:2:0
- YCbCr 4:4:4 to YCbCr 4:2:2
- RGB to YCbCr4:4:4
- YCbCr4:4:4 to RGB
- RGB or YCbCr 4:4:4, 4:2:2, and 4:2:0 passthrough
・Content protection
- HDCP 2.3 and HDCP 1.4 compliant repeater function with pre-programmed on-chip keys
・On-chip microprocessor with SPI ROM interface
・1.2V core power supply, 3.3VI/O power supply
・Operating temperature range: 0℃ to 85℃
・56-pin 7x7mm QFN halogen-free RoHS package
・ESD: 8kV (HBM)
■ Target applications
・DisplayPort™ to HDMI™ active protocol converter (dongle)
・USB-C® to HDMI™ protocol converter (using DisplayPort™ Alt Mode over USB-C®)
・Thunderbolt 3 to HDMI™ protocol converter (Thunderbolt 3 video source devices support both Thunderbolt and DisplayPort Alt Mode)
- Docking station with USB-C® or DisplayPort™ input and HDMI™ output
- TVs with USB-C® or DisplayPort™ inputs that require HDMI™ for video processing
Monitors with USB-C® or DisplayPort™ inputs that require HDMI™ for video processing
PS196
A DisplayPort™ 2.0 to HDMI™ 2.1 protocol converter that receives both video and audio streams over a DisplayPort™ link and converts them to HDMI™ with support for TMDS or FRL output signals. The DP receiver supports link rates up to 8.1 Gbps on 4 lanes. The HDMI™ output port can operate as a TMDS or FRL transmitter. The FRL transmitter is compliant with the HDMI™ 2.1 specification supporting maximum data rates of up to 12Gbps per lane and utilizes DSC pass-through mode to achieve display resolutions up to 10K@50Hz. HDMI™ TMDS transmission is supported up to a maximum allowable data rate of 6Gbps per lane, delivering displays up to 4Kx2K at 60Hz refresh rate with 24-bit color and 3D video formats up to 1080p at 120Hz. Supports DSC1.1/1.2a compressed video transport stream with applied FEC decoding and encoding to ensure visual glitch-free DSC bitstream transmission.
It integrates an Arm® Cortex®-M4 processor for fully autonomous operation and robust system compatibility and interoperability. Firmware customization can be accomplished utilizing an external SPIROM, and field firmware updates can be enabled through Parade Technologies' licensed AUX updater, which utilizes highly encrypted firmware security. Full support for both HDCP 1.4 and HDCP 2.3 content protection, including HDCP repeater functionality with integrated HDCP Rx and Tx keys. Building on Parade Technologies' classic design, the PS196 has the highest power performance on the market. Very low power consumption extends battery life for portable devices when operating in standby and low power modes.
■ Features & block diagram
●General features
・Supports multiple color formats
・DP: RGB 6/8/10/12 bpc per component,
YCbCr4:4:4/ YCbCr4:2:2 /YCbCr4:2:0 8/10/12 bpc
・HDMI™: RGB 8/10/12 bpc, YCbCr4:4:4,
YCbCr4:2:2 and YCbCr4:2:0 8/10/12 bpc
・Supports color space conversion
・Supports conversion of DP Adaptive-Sync video to HDMI™ VRR
・Content protection HDCP repeater with on-chip key
・Supports conversion from DP HDCP 2.3 to HDMI™ HDCP 1.4
・On-chip Arm🄬 Cortex🄬-M4 processor with secure boot
・95V core, 1.2VI/O, and 3.3VI/O power supply
・External 25MHz ±50ppm crystal
・External 3.3V SPI flash speed up to 54MHz
・Operating temperature range: 0°C to 70°C
・74-pin 7x8mm QFN halogen-free RoHS package
●DisplayPort™ 2.0 receiver function
・Compliant with DisplayPort™ 2.0 for RBR, HBR, HBR2, and HBR3
Can accept 1, 2, and 4 DisplayPort™ main link lanes
・Supports SSC up to 0.5% downspread
・DPCD supports DP v2.0 data structure
・HDCP 2.3 and HDCP 1.3
・VESA🄬 Display Stream Compression Standard (DSC) v1.1/1.2a bitstream processing and FEC policy, DSC decoder and pass-through mode
・Supports DP source detection via AUX channel
・DP input port supports lane swapping and polarity swapping
・Supports horizontal blanking extension (HBE)
・Supports adaptive sync video
・Supports CEC-Tunneling-over-AUX
●HDMI™ 2.1 transmitter function
・Compliant with HDMI™ 2.1
・TMDS data rate is up to 6Gbps
・FRL data rate up to 12Gbps
・SCDC (Status and Control Data Channel)
・HDCP 2.3 and HDCP 1.4
・Supports DSC pass-through mode
・TMDS and FRL modes with scrambling for EMI/RFI reduction
・Supports FRL FFE
・Supports static and dynamic HDR
・Supports up to 8 channels of 16/20/24-bit audio, sample frequency up to 192kHz
・Supports IEC 60958 L-PCM, IEC 61937 compressed audio, 32ch L-PCM 3D audio
- Supports Variable Refresh Rate (VRR), Quick Media Switch (QMS), Automatic Low Latency Mode (ALLM), and Dynamic Automatic Lip Sync (DALS)
・Supports DVI output format
■ Target applications
・Plug-in protocol converter (dongle)
・Docking station
・Motherboard
・TV/signage display
Inquiry / Quotation
If you have any questions about this product or would like a quote, please contact us below.
Parade Technologies Manufacturer Information Top
Parade Technologies Manufacturer Information If you would like to return to the top page, please click below.