PSoC™ 4100S Plus is a product of the PSoC™ 4 platform architecture.
It consists of a microcontroller that combines standard communication IP and timing peripherals, best-in-class capacitive touch-sensing system (CAPSENSE™), programmable general-purpose continuous-time and switched-capacitor analog blocks, and programmable connectivity. I'm here.

NGC1081 is a microcontroller with NFC (Near Field Communication), sensing and energy harvesting capabilities. You can develop small smart devices that can be controlled and powered by your personal mobile phone. It can operate in passive mode, communicating wirelessly and harvesting energy from NFC fields, or in battery mode as a self-contained sensing node.

TOLL, D²PAK 7-pin, D²PAK, TO-220 new OptiMOS™ 5 power MOSFET 100 V with lower RDS(on) than existing devices and higher RDS(on) than previous best-in-class OptiMOS™ 5 is reduced by up to 21.7%.
Offered in industry-standard surface-mount and through-hole packages, they are ideal for applications requiring high power and ultra-low RDS(on).

The new Power PROFET™ + 12 V smart high-side switch family offers a very low RDS(on) of 0.6 mΩ in a small 8-pin leadless power package. With its ability to drive high-current loads up to 60 A and state-of-the-art protection and diagnostic features, the Power PROFET™ + 12 V is ideal for power distribution of 12 V board nets and other high-current applications such as electromechanical relays, Ideal for replacing fuses and discrete circuits. .

Two new additions to the PROFET™ +2 12 V family, the BTS70x0-2EPL, provide protection and diagnostics. The new product is equipped with a capacitive load switching mode that reduces the current peak to the capacitor that occurs when the switch is on as a function to charge the capacitive load.
These two products implement current limiting as a protection feature. Additionally, ISO26262-ready documentation supports use in safety-related applications.

The WLC1150 IC is a highly integrated wireless power transmitter and USB-PD sink solution for 50 W wireless charging with Infineon's high power proprietary protocol. It complies with the latest Qi specification (1.3.x) and supports both extended power profile and basic power profile modes.

CAN Signal Enhancement Transceivers actively improve signal integrity in networks, reduce signal ringing effects, and support operation in larger topologies at significantly higher bit rates than before. CAN FD SIC parts can replace existing CAN (FD) transceivers, making it easy to adopt this technology without major changes to your application. Additionally, it is backward compatible with existing CAN transceiver solutions.

EZ-PD™ PMG1-B1 is a highly integrated single-port USB-C Power Delivery (PD) microcontroller with a built-in buck-boost battery charger. EZ-PD™ PMG1-B1 is USB PD 3.1 specification compliant with Arm® Cortex®-M0/M0+, 128KB Flash and 16KB SRAM for custom function implementation, gate drivers, and hardware-controlled protection features It integrates a programmable MCU. The EZ-PD™ PMG1-B1 provides a wide input voltage range (4-24 V, 40 V tolerant) and programmable switching frequency (150-600 kHz) in an integrated PD solution on board.

REF_ICC80QSG_BPA2_84W is an 84 W flyback based reference design suitable for e-bike battery chargers. It uses a quasi-resonant flyback controller ICC80QSG and 700V CoolMOS™ P7 technology in a small, flow solderable SOT-223 package. .

REF-MHA50WIMI111T is a reference design for a fan motor control board. In addition to the motor connector, it provides a control interface used in typical fan-driven applications such as room air conditioner (RAC) indoor units. The IMI111T-026H is part of the iMOTION™ IMI111T series and provides complete 3-phase inverter functionality including motor controller, 3-phase gate driver, and IGBT-based power stage in a compact DSO package.