HYPERRAM™ is a high-speed, low-pin-count, low-power self-refresh dynamic RAM (DRAM) for high-performance embedded systems that require extended memory for scratchpad or buffering purposes.

EasyPACK™ 4B 950V Power Module: With the introduction of F3L600R10W4S7F_C22 with TRENCHSTOP™ IGBT7 and 1200V CoolSiC™ Schottky diode, the Easy family is extended to the Easy 4B package. The F3L600R10W4S7F_C22 features the latest TRENCHSTOP™ IGBT7 and CoolSiC™ Schottky diodes. The internal ANPC topology is ideal for 1500V DC solar string inverters, delivering up to 350 kW in a single module configuration.

The TDA38640/740/725 are easy-to-use, fully integrated high efficiency DC-DC regulators with Intel SVID and I2C/PMBus interfaces.
The controller utilizes Infineon's fast COT engine, which reduces design effort and enables faster transient response.

Infineon's new family of fixed-frequency AC-DC integrated power stages integrates an 800 V breakdown voltage and the recently added 950 V avalanche-resistant high-voltage superjunction MOSFET for a wide input voltage range.
Housed in a DIP-7 package, these highly integrated controllers support isolated and non-isolated topologies such as flyback and buck and cover switching frequency ranges of 100 kHz and 65 kHz.

The ICC80QSG is a PWM controller for flyback topologies operating in quasi-resonant mode or valley switching DCM, providing high efficiency power transfer over a wide operating range. For charging applications, it offers a wide power range and comprehensive protection features. IC design is easy and requires minimal external components.

Infineon has expanded its 1ED4417x family of 25 V single-channel low-side drivers with integrated protection.
The new product 1ED44171N01B is an EiceDRIVER™ 25 V 1ch low-side non-inverting gate driver IC with fault detection. It offers a typical source/sink current of 2.6 A in a small 5-pin PG-SOT23 package.

The new StrongIRFET™ 2 in 60 V power MOSFETs are Infineon's latest generation MOSFET technology for a wide range of applications, suitable for both slow and fast switching frequencies. This new family complements the well-established StrongIRFET™ MOSFETs and offers higher performance options.

CIPOS™ Mini Intelligent Power Module IM523 series is energy saving and system cost reduction is the trend of all times for both consumer and industrial use.
Incorporating Infineon's new 600 V TRENCHSTOP™ RC-Drive 2 and C5SOI gate driver, the CIPOS™ Mini IM523 series can achieve both excellent power dissipation and thermal performance for low and medium power applications.
The IM523 series is a solution for 600V, 6A to 17A 3-phase inverters and is suitable for a variety of applications such as fans, pumps, air conditioning, MHA, and industrial drives.

The EiceDRIVER™ APD 2ED2410-EM is a smart high-side N-channel MOSFET gate driver that includes 2-output control via logic pins and integrated It-wire protection, designed for emerging automotive power architectures.

The 600V CoolMOS™ S7 SJ MOSFET family is optimized to feature low conduction losses and the lowest RDS(on) on the market for high voltage SJ MOSFETs in a compact SMD package. Featuring unprecedented RDS(on) x price advantage figures, it is ideal for solid state circuit breakers and relays, PLCs, battery protection and active bridge rectification of high power supplies. Topside cooling provides the most efficient SMD cooling, minimizing conduction losses and maximizing power density.

A cost-effective, fully integrated solution for low voltage soft starters, UPS bypasses and low voltage drives.
The 75mm diameter, 26mm height 1600V power disc lineup has been extended to 1400A and 1700A. The T1400 and T1700 are cost-effective alternatives to the already established T1190 and T1500.
the Company new thyristor offers the highest continuous current in a 75 mm package. Customers have an increasing opportunity to provide cost-effective and compact semiconductor solutions. A standard 75mm package is available for new and existing designs.

The OPTIGA™ TPM SLB 9673 FW26.xx is the latest addition to the OPTIGA™ TPM family targeting connected devices requiring enhanced security features.
This standardized, ready-to-use security solution features an I2C interface. It serves as a solid foundation for identifying and authenticating network infrastructure and light industrial machinery such as factory robots and programmable logic controllers (PLCs). Additionally, it protects data integrity and confidentiality.

OPTIGA™ Trust M Express provides robust security for IoT devices at every step, from manufacturing to cloud onboarding to field deployment. OPTIGA™ Trust M Express cryptographic IDs are delivered in certified and secure Infineon fabs. Protected against exposure during all stages of product life. This off-the-shelf solution eliminates the need for secure ID injection during IoT device manufacturing.

EZ-PD™ Barrel Connector Replacement (BCR) targets electronics powered by legacy barrel connectors (up to 100W) or USB micro-B connectors such as drones, smart speakers, power tools and other rechargeable devices Infineon's highly integrated USB Type-C port controller. EZ-PD™ BCR complies with the latest USB Type-C and USB Power Delivery (PD) standards, allowing users to power their devices from barrel connector to USB-C with fewer external components and no firmware development. It is possible to quickly convert to power supply via connector. The EZ-PD™ BCR integrates a complete USB Type-C transceiver, USB PD policy manager, load switch controller with soft-start, all required termination resistors for USB Type-C ports, and system-level ESD protection. I'm here.