A low-capacitance, two-wire, bidirectional ESD/transient current protection diode (TVS: transient voltage suppressor) for USB-compatible, capacitive sensing applications has been released.

A low clamping voltage, low capacitance, unidirectional ESD/Transient Voltage Suppressor (TVS) for audio interfaces and headsets has been released.

Wireless charging IC WLC1115 features USB-PD/PPS sink, DC/DC controller, full-bridge inverter, sensing peripherals, configurable memory, software supporting Qi v1.3.x and proprietary charging protocols, etc. Highly integrated wireless charging transmitter IC.

The IM241 series is the new generation of CIPOS™ Micro using the latest RCD2 IGBT technology. It delivers a maximum current of 6 A in a small package, making it ideal for low power applications such as indoor/outdoor air conditioners, fans, pumps, and drain pumps for dishwashers and washing machines.

The BTT3050EJ is a 50 mΩ single channel smart low-side power switch in a PG-TDSO-8 exposed package with built-in protection features. This 24 V high-speed low-side switch is capable of PWM drive up to 20kHz and together with the BTT3018EJ completes the HITFET™ + 24V family.

OptiMOS™ 6 40V is a power MOSFET for all automotive applications, especially EPS, DC/DC, BLDC in CO2-friendly vehicles. It supports a high current of 250A, achieves best-in-class power density and power efficiency, and comes with Infineon's quality level known for its rugged automotive packaging.

The DD170N36K is a rectifier diode module in a 34 mm package with a withstand voltage of 3600 V and a continuous current of 170 A. The package features pressure contact with an insulated copper baseplate. Customers designing medium-voltage drives can benefit from a smaller footprint, with a 34mm package instead of a 50mm and a voltage rating of 3600V.

The LITIX™ Power TLD5191ES is a synchronous 4-switch buck-boost DC/DC controller with built-in protection. The product concept works for maximum system efficiency and minimum external component count in automotive exterior lighting driving high power LEDs.

The XENSIV™ BGT60ATR24C is an automotive 60GHz radar sensor that enables ultra-wideband FMCW (Frequency Modulated Continuous Wave) operation in a small package. Sensor configuration and data acquisition is done through a digital interface, and an integrated state machine enables independent data acquisition and power mode optimization for low power consumption.

The EVAL-PFC5KIKWR6SYS is an evaluation board for applications such as air conditioners and EV chargers. Includes TRENCHSTOP™ 5 WR6 (IKWH40N65WR6), EiceDRIVER™ gate driver IC (1ED44175N01B), fast diode (IDE), rapid diode (IDW60C65D1).
This product is a high-speed switching, analog control, 2ch interleaved 5 kW WPFC converter. A maximum efficiency of 97.8% is achievable. It also has the advantages of twice the switching frequency and half the ripple current compared to a single PFC cycle, which allows the inductor to be placed on the board.

XENSIV™ KIT CSK BGT60TR13C is an IoT sensor platform for IoT device development. We support the ideation of new prototypes using radar sensors.

Exercising IoT systems with Infineon's highly integrated prototyping concept (combinable approach, sensors, security, microcontrollers, adapter boards)

Rapid prototyping platform for applications with Infineon's XENSIV™ PAS CO2 sensor The XENSIV™ Connected Sensor Kit is an enabler for rapid development of custom solutions using Infineon products. The Connected Sensor Kit supports customers in testing and prototyping sensor-driven IoT products and use cases. Real-time sensor evaluation with custom settings and visualization of cloud-based PAS CO2 sensor data.