The TLE9012DQU is designed for lithium-ion battery packs used in many applications in automotive (electric vehicles such as MHEV, HEV, PHEV, and BEV), industrial (storage systems), and consumer (e-bike BMS, home energy storage, etc.) Multichannel battery monitoring and balancing ICs. The TLE9012DQU has four main functions: cell voltage measurement, temperature measurement, cell balancing and isolated communication with the main battery controller.
Target applications: Battery Electric Vehicles (BEV), Mild Hybrid Electric Vehicles (MHEV), Hybrid Electric Vehicles (HEV), Plug-in Hybrid Electric Vehicles (PHEV), 12V Li-ion battery systems, etc.

The TLE9015DQU is a battery monitoring transceiver IC designed for daisy-chaining multiple TLE9012DQUs in a lithium-ion battery.
Two sets of UART and iso UART interfaces can support ring communication to increase system availability at low cost.
Target applications: Battery Electric Vehicles (BEV), Mild Hybrid Electric Vehicles (MHEV), Hybrid Electric Vehicles (HEV), Plug-in Hybrid Electric Vehicles (PHEV), 12V Li-ion battery systems, etc.

Infineon Automotive 750V EDT2 Discrete IGBT in To247PLUS package designed for xEV Traction Inverter.

AIKQ200N75CP2 is the best-in-class discrete IGBT in TO247 Plus package with the highest nominal power capacity (IC(nom)
has achieved 200A at Tc =100° C) without bond wire limitations.
Target applications: xEV inverters, DC link discharge switches, motor drives, etc.

The BTN9990LV is a product that integrates a p-channel high-side MOSFET, an n-channel low-side MOSFET, and a driver IC chip into a single package. A p-channel high-side switch eliminates the need for a charge pump, minimizing EMI. It also has a built-in driver IC with logic level input, current detection function, slew rate adjustment function, dead time function, overheating, undervoltage, overcurrent, and short circuit protection, making it easy to interface with a microcontroller. Become.

Target applications: Automotive 12 V brushed DC motors, seat belt pretension, seat control, power lift gates, etc.

CIPOS™ Tiny 600V/15A three-phase IGBT-based intelligent power modules are configured with optimized performance and compact size for inverter power ratings up to 1.5HP. The new members of the IM323 family are specifically designed for room air conditioning and home appliance applications.

Target application: Home Appliances, Industrial Motor Drives and Controls, Home Air Conditioners - Motors, System Controls, Monitoring
such as

The new low on-resistance regions of 7mΩ/14mΩ/20mΩ in CoolSiC™ 1200V SiC MOSFETs in TO247 package are built on an optimized state-of-the-art trench semiconductor process to combine performance and reliability. The latest CoolSiC™ MOSFETs offer best-in-class heat dissipation with .XT technology. CoolSiC™ MOSFETs are ideal for power factor correction (PFC) circuits, bidirectional topologies, hard switching and resonant switching topologies such as DC-DC converters and DC-AC inverters. New low on-resistance regions of 7mΩ/14mΩ/20mΩ for CoolSiC™ 1200 V SiC MOSFETs in TO247 package built on optimized state-of-the-art trench semiconductor process to combine performance and reliability . latest
's CoolSiC™ MOSFETs provide best-in-class heat dissipation with .XT technology.

Target applications: high-speed EV chargers, photovoltaic systems, energy storage systems, industrial drives, etc.

FS3L200R10W3S7F_B94 is a 3-level boost module with Easy 3B package. Contains a CoolSiC™ Schottky diode and a 950V TRENCHSTOP™ IGBT7 chip. Developed for C1500V photovoltaic applications, the power module is compatible with bifacial PV modules with outputs of 500W and above. All modules are equipped with three maximum power point tracking (MPPT),
Input current per MPPT reaches up to 30 A.
Customers also benefit from high efficiency and robust bypass diodes that protect against lightning. further
In addition, EasyPACK™ has a uniform height of 12mm, which makes it easy and flexible to design Easy 1B, 2B and 3B for the MPPT stage and the inverter stage.
can be combined with
Target application: Solar power generation, etc.

Infineon's latest anti-counterfeiting turnkey solution combines enhanced device authentication with an unprecedented level of configuration flexibility. OPTIGA™ Authenticate S gives each product a private key that enables authentication at the point of use and tracking of products throughout the supply chain. With 16 extensive customization options, it can handle even the most complex certification requirements, all in a small footprint. OPTIGA™ Authenticate S is suitable for an ever-expanding range of applications, from disposable and rechargeable batteries for smartphones, mobile devices and e-mobility solutions, to computational and robotic systems in highly complex IoT environments. This turnkey solution comes with full system integration support including embedded software, host software, and advanced ecosystem support tools based on the latest PSoC™ 6 MCU.
Target applications: air conditioners, water purifiers, disposable products such as filters, batteries and accessories, battery powered tools, etc.

IM69D127 is a digital high-performance MEMS microphone based on Infineon's new shielded dual-membrane MEMS technology, which provides high waterproof/dustproof (IP57) at microphone' level. Its small size of only 3.6 x2.5 x 1.0 mm makes it ideal for compact audio equipment such as TWS earphones.
Target Applications: TWS Earphones, ANC Headphones, Laptops & Tablets, Wearables, etc.

Infineon's XENSIV™ MEMS analog microphone IM73A135 sets new performance benchmarks for MEMS microphones. Best-in-class signal-to-noise ratio (SNR) of 73dB and high acoustic overload point (AOP) of 135 dBSPL enable clear audio pickup from the softest to the loudest.
The microphone is based on Infineon's new shielded dual-membrane (thin-film) MEMS technology, which provides high dust protection (IP57) at the microphone level. The IM73A135 enables designers to enjoy the unique advantages of MEMS technology while achieving high sound quality performance previously only achievable with ECM.
Target applications: ANC headphones, conference systems, smart speakers, etc.

The PSoC™ 62S2 Evaluation Kit (CY8CEVAL-062S2) is a kit for evaluating and developing applications using the PSoC™ 62 MCU (CY8C624ABZIS2D44). Based on the AIROC™ Wi-Fi/Bluetooth® combo device, it features an M.2 interface that allows you to connect a compatible M.2 radio module. Using the PSoC™ 62MCU as a Wi-Fi host MCU, an AIROC™ device that enables connectivity to Wi-Fi and Bluetooth® allows easy prototyping of embedded IoT applications using this kit and ModusToolbox™ software. can be created and evaluated in Additionally, the kit also includes an OPTIGA™ Trust-M security controller for secure cloud device provisioning.
Target applications: gateways, smart homes, consumer electronics, HMI, voice processing, etc.

The Bidirectional Buck Converter Evaluation Board EVAL_BIDI_HB _1EDN7550B is designed to apply the 1EDNx550B to drive low-side and high-side switches in a half-bridge topology. The 1EDNx550B is a member of the EiceDRIVER™ family of single-channel gate drivers with true differential inputs (TDI).
Target applications: industrial equipment, power supplies, SMPS, etc.

The REF_Fridge_D111T_RC2_SL is a ready-to-use reference PCB designed for refrigerator compressors. Infineon's solutions are shown, such as the digital motor control IC iMOTION™ driver IMD111T-6F040 and the RC-D2 600 V discrete IGBT IKD04N60RC2. The design can be easily copied to the final production application board, resulting in a fast time-to-market. You can easily connect to a PC by using iMOTION™ Link. This tool is designed for programming and debugging different series of iMOTION™ motor control ICs. An indispensable tool for tuning motor control systems.
Target applications: home appliances, motor control/drives, refrigeration/freezer/compressor drives, etc.

REF-SHA35WRC2SYS is a full-featured starter kit consisting of a daughter card with infrared sensor on the mainboard and a suitable remote control Box. The mainboard features an IMD112TiMOTION™ driver that provides turnkey PFC and motor control with a field-proven MCE (Motor Control Engine). It also includes a PFC stage with IKA08N65H5 as a switch, IRS44273L as a suitable gate driver and IKN03N60RC2 as an inverter stage. The 90mm diameter single-layer PCB provides a cost-effective, ready-to-copy reference for common ceiling fan designs.
Target Applications: Ceiling Fans - Motor Control/Drive Solutions, Home Appliances, Motor Control/Drives, etc.