The XENSIV™ PAS CO2 sensor is an excellent carbon dioxide (CO2) sensor. The product is space-saving and offers high-end performance, such as direct ppm reading, to meet the most stringent indoor air quality regulations (such as California's Title 24) . It is also the first full-scale CO2 sensor in an SMD package that complies with the JEDEC standard lead-free reflow profile.
Target applications: demand-controlled ventilation, commercial and residential HVAC, indoor air quality monitoring, smart agriculture, etc.

This product is a 2-output smart high-side N-channel MOSFET gate driver controlled by SPI. Compared to conventional products, the turn-on and turn-off performance of the driver has been enhanced, and even with an increased number of MOSFETs, it is possible to control large currents on the order of hundreds of amps while ensuring high-speed switching on/off capability. The MOSFETs can be operated in a back-to-back configuration and integrated current-sense amplifiers allow high-side and low-side current monitoring. Parameters can be adjusted via SPI, and registers such as monitoring data can be read.
Target applications: battery protection switches, input protection switches, static loads and power switches that require large currents, etc.

The MOTIX™ 6EDL7141 is Infineon's latest 3-phase motor control gate driver IC, enabling the development of high-performance battery-powered products using BLDC and PMSM motors. Ideal for applications such as cordless power tools, garden supplies, and automated guided vehicles. The MOTIX™ 6EDL7141 is configurable with over 50 parameters using its built-in digital SPI interface, allowing it to drive a wide variety of MOSFETs and maximize system efficiency.
Target applications: cordless power tools, automated guided robots, cordless gardening tools, etc.

This product is an evaluation board operated by a motor with built-in Hall sensors for rotor position detection. It combines the XMC1400 series microcontroller with the MOTIX™ 6EDL7141 three-phase smart driver IC and best-in-class Infineon OptiMOS™ 6 power MOSFETs. It has become a product. The MOTIX™ 6EDL7141 reduces system component count and shortens development time while significantly improving power density, system performance and peak power pulse capability.

Target applications: consumer products, various drives, motor control & drives, power tools, etc.

The new OptiMOS™ 5 technology for 60 V MOSFETs offers state-of-the-art performance with low RDS(on), QG and gate capacitance. Additionally, it minimizes conduction and switching losses. Two new products join the existing product family: S3O8 (3x3mm2) and SingleSS08 (5x6mm2) in industry-standard small packages.

Target applications: DC-DC, ADAS, wireless charging, LED lighting, CAV applications, etc.

Infineon is extending its 150 V OptiMOS™ 5 power MOSFET portfolio to include TO-Leadless packages. The TOLL package enables high current designs, high power density and low EMI. Its features make it ideal for applications such as small electric vehicles, e-scooters, hot-swap and battery management systems.

Target Applications: Light Electric Vehicles (LEV), Battery Powered Applications, POL, Telecom, Electronic Fuse (e-fuse), etc.

The product family features a fast COT engine that improves Vout limits, saves capacitors, allows higher fsw (up to 2MHz) and increases integration. OptiMOS™ 5 MOSFETs deliver benchmark efficiency in a small footprint in thermally constrained applications with mains voltages of 3.3 V and 5 V, 1 V core voltage, Tamb ≥ 85°C without airflow , making it an ideal solution for reducing power losses and solving thermal challenges.
Target Applications: Servers, Enterprise Storage, Datacom, Telecommunication Base Stations, Distributed POL, etc.

The PSoC 61 CY8C61x4 programmable product line is a high-performance microcontroller that uses the PSoC 6 MCU platform and employs the Arm Cortex-M4 CPU. Includes low-power flash technology, CapSense® capacitive sensing, high-performance, low-power analog peripherals, and standard communication and timing peripherals. Designed for IoT applications including wearables, smart home, industrial IoT, and portable medical devices.
Target applications: smart home automation, smart building, industrial control, medical/healthcare, etc.

PSoC® 62 is built on an ultra-low-power 40 nm platform with Arm® Cortex™-M4 and Arm Cortex-M0+ CPUs, low-power flash technology, CapSense® capacitive sensing, high-performance, low-power analog It combines peripherals, standard communication and timing peripherals. Designed for Internet of Things applications such as wearables, smart homes, industrial IoT, and portable medical devices.
Target applications: smart home automation, smart building, industrial control, medical/healthcare, etc.

The BGA9H1BN6 is designed for 4G and 5G applications covering the 3GPP band from 2.5 to 2.7 GHz (band n41). This LNA greatly improves system sensitivity compared to traditional LNAs due to its high gain and ultra-low noise figure. A GPIO interface also allows easy control of multiple operating modes. You can choose from 4 modes including power saving mode. In addition, a low power mode with a current consumption of 2.2 mA and an operating voltage of 1.2 V keeps the overall power consumption extremely low.
Target applications: LTE/5G smartphones, wearables, IoT, etc.

This product is a high-speed, low-pin-count, low-power self-refreshing dynamic RAM (DRAM) for high-performance embedded systems requiring expanded memory. It supports HYPERBUS™ and Octal xSPI interfaces that conform to the JEDEC xSPI standard, supports a maximum read/write bandwidth of 400MBps in DDR mode, and features the industry's smallest 24-ball BGA package (6mm x 8mm). . Temperature grades are AEC-Q100 compliant with industrial and extended temperature products, as well as multiple automotive grades.
Target applications: Automotive: instrument clusters, industrial: machine vision, consumer: wearable devices, etc.

SEMPER™ NOR Flash Memory is the industry's first ASIL-B compliant and ASIL-D compliant, providing the high performance required for applications such as automotive, industrial equipment, and communication base stations, as well as the industry's highest level of functional safety and reliability. NOR flash memory available. Each partition area can retain data for over 1 million write/erase cycles or up to 25 years and supports a wide temperature range (-40°C to +125°C).
Target applications: Industrial equipment: PLC, Automotive: ADAS/AD, Communication equipment: 5G radio heads and base stations, etc.

The OPTIGA™ Trust M IoT Security Development Kit is the easiest kit to develop and evaluate end-to-end security use cases for your IoT devices.
You can prototype various security use cases and build full-featured IoT applications.
Target applications: smart home, smart building, industrial automation/PLC, robots, etc.

This low-cost Arduino™ UNO compatible shield board allows you to easily connect various sensors to the PSoC™ 6 MCU platform for audio and machine learning applications. This shield can be used with ModusToolbox™ Machine Learning software. ModusToolbox™ Machine Learning (ML) enables rapid evaluation and deployment of Machine Learning models on Infineon MCUs.
Target applications: smart home, smart building, industrial control, medical/healthcare, etc.