New line-up of existing 1200V IGBT4 with latest generation TRENCHSTOP™ IGBT7 chip, delivering current ratings from 300 to 900A
The new EconoDUAL™ 3 module has been released. FF300R12ME7_B11, FF450R12ME7_B11, FF600R12ME7_B11 are lower
The lineup includes current ratings.
Target application: general purpose drives, hybrid electric vehicles, commercial vehicle applications, photovoltaics, etc.

The 1400V and 1800V Power Start using pressure contact technology is a cost effective fully integrated solution with overload capability up to 5000A.
The new design is focused on removing complexity and reducing component count, and the Power Start has a built-in heatsink, eliminating the need for thermal grease.
It is also possible to install easily without using. In addition, double-sided cooling allows it to withstand high overload currents.
Target application: Water pumps, electric mills, belt conveyors, etc.

100V tolerant half bridge designed for advanced DCDC converter applications such as telecommunication bus converters
Integrated Power Stage. With the demand for higher power density and more compact mounting area for DCDC telecom converters,
Leveraging the latest silicon technology, we provide solutions that meet challenging design parameters while improving performance and reliability.
Target application: Telecom, servers, solar power generation, robotics, motor drives for multicopters, etc.

IPW65R018CFD7, a new product of the super junction CFD7 series using the latest technology, has been released.
High-speed body diode in TO-247 package for applications such as servers, telecoms, solar, EV charging stations, etc.
It is well suited for resonant topologies in industrial applications and offers significant efficiency improvements over competing products.
Target application: High-speed EV charging, server power supply, solutions for solar power generation systems, communication infrastructure, etc.

The newly released TLE8082ES is a family product of the TLE8080-xEM and TLE8088EM in the conventional lineup.
OBD II, EURO5/BHARAT VI compliant internal combustion engine system for 2-wheel and 3-wheel vehicles specialized in high-performance electronic fuel injection (EFI) technology.
Includes supporting improvements and features. In addition, the small package allows optimization in board space for two-wheelers.
Target application: Engine control for motorcycles, two-wheeled vehicles, three-wheeled vehicles, scooters, boats, snowmobiles, etc.

This product is intended to supply power to off-board loads used under harsh conditions in automotive applications.
Equipped with protective functions against power supply and ground faults. It has high tracking accuracy, reverse current protection, power good function, and the package is
Adopting DSO-8 (with backside heat dissipation pad), it supports power supply voltage up to 40V and output current up to 250mA.
Target applications: body applications, powertrains, safety applications, etc.

Automotive linear regulator TLS820D2EL VSE is a linear voltage with high performance, ultra-low dropout voltage and low quiescent current
regulator. 3 V to 40 V input voltage range and low quiescent current of only 20 μA, so it is always connected to the battery
Great for power systems. In addition, it is possible to select and use either 5V or 3.3V output voltage with one device.
Target application: body application, powertrain, safety application, etc.

EiceDRIVER™ uses Infineon's coreless transformer technology to transfer signals across galvanic isolation,
This is a high voltage gate driver for automotive use. We also have a lineup of pin-compatible products optimized for IGBT and SiC power technology.
The extremely compact package design and high functional integration allow use in limited board space.
Target applications: main inverters, DCDC converters, on-board chargers, industrial drivers, etc.

A reference kit developed for applications such as pumps, fans and compressors, the design is a general drive
for EMI filters, prechargers, capacitor banks, isolated power supplies, power modules, controllers and heatsinks with fans. There are two types of lineup, one with a case that houses all the electronic components and the cooling system, and the other without a case.
Target application: general purpose drives, industrial motor drives, motor controls, etc.

Active Miller clamp function and 2-stage slew rate control (2L-SRC) function for half bridge circuit switch drive
This is an evaluation board that uses the built-in gate driver IC (1ED3251MC12H). switching scheme with slew rate control
Evaluation can be performed, and the type of switch can be freely selected.
Target application: AC and brushless DC motor drives, high voltage DCDC converters, DCAC converters, UPS systems, etc.

Gate driver IC equipped with two-stage slew rate control (2L-SRC) function for switch drive of half bridge circuit
(1ED3241MC12H) is used as an evaluation board. It is possible to evaluate switching methods using slew rate control,
The type of switch can be freely selected.
Target applications: AC and brushless DC motor drives, high voltage DCDC converters, DCAC converters, UPS systems, etc.

Includes 3-phase drives with TRENCHSTOP™ discrete IGBTs for industrial applications, XMC Drive-Card 4400
By combining with a control board equipped with an M5 32-pin interface connector such as Infineon in your application
TRENCHSTOP™ Discrete IGBTs can be introduced and demonstrated.
Target applications: energy storage systems, industrial motor drives and controls, solutions for photovoltaic systems, USPs, etc.