New product information for August 2021
Regarding the agenda, it is as follows.
For details, please refer to the attached document.
agenda
Thyristor - Thyristor Prime Disk for Uninterruptible Power Supply (UPS)
We have the widest range of thyristor products for UPS bypass applications up to 2.4MVA.
With one 111mm thyristor disc and forced air cooling, the limit is 2.0MVA at 480V, resulting in higher power density and compact
It realizes the design and has the highest current capacity line-up on the market.
Target applications: UPS bypass circuits, UPS electrostatic transfer switches, low voltage soft starters, etc.
IGBT - IGBT module with TRENCHSTOP™ IGBT7
The EconoPIM™, EconoPACK™ 2, and EconoPACK™ 3 IGBT modules, which have been in the lineup for a long time, are equipped with the latest generation technology.
Now equipped with TRENCHSTOP™ IGBT7 chips. The maximum continuous operating temperature (Tvjop) under overload conditions is 175°C, and compared to conventional IGBT4,
Cooling can also be simplified due to the increased switching frequency.
Target Application: Industrial Application
IGBTs - 650V TRENCHSTOP™ 5 WR6 Family
TO-247-3-HCC package products have been added to the existing TRENCHSTOP™ 5 WR6 family.
The package is more reliable against contamination and is ideal for power factor correction (PFC) in residential/commercial air conditioners and welding applications.
Realizing low loss, low switching loss (ESW), and expanding the creepage distance and clearance distance ensures higher reliability.
Target applications: PFC in residential/commercial air conditioners, welding applications, etc.
IGBTs - 1200V TRENCHSTOP™7 S7 Family
This product family integrates full-rated, very soft diodes for lower VCE(sat), improved controllability, and
Offers the highest thermal performance and enhanced robustness with HV-H3TRB and cosmic ray resistance. 8A, 15A, 25A, 40A, 50A six
Released in the current class and designed specifically for hard switching applications where short circuit capability is required.
Target applications: industrial drives, industrial power supplies, solar inverters, etc.
MOSFET - OptiMOS™ PD series in small package
OptiMOS™ PD is a new product line-up that is mainly suitable for USB-PD and fast charger designs.
It features low ON resistance (Rdson), low gate, low output, low reverse recovery load, and excellent temperature characteristics.
We have a wide lineup of 6mm x 5mm leadless packages.
Applicable applications: USB PD chargers, adapters, etc.
Reference Design - REF_ICL8800_LED_43W (with ICL8800)
A 43W reference design featuring Infineon's high power factor flyback controller ICL8800, the board
Constant voltage (CV) secondary side regulation (SSR) system intended for use with constant current (CC) converters in LED lighting applications.
The product is designed as a plug-and-play solution and can be combined with a DC/DC board on the secondary side.
Target applications: LED lighting, dimming functions such as dimming to off, lighting fixtures up to 125W, etc.
Reference Design - REF_ICL8810_LED_43W_BM with ICL8800
A 43W reference design featuring Infineon's high power factor flyback controller ICL8800, the board
Constant voltage (CV) secondary side regulation (SSR) system intended for use with constant current (CC) converters in LED lighting applications.
Provides the optimum topology for LED drivers with dimming capability down to 0.1% and dim to off setting.
Target applications: LED lighting, dimming functions such as dimming to off, lighting fixtures up to 125W, etc.
Reference Design - REF_ICL8820_LED_43W_JT (with ICL8800)
A 43W reference design featuring Infineon's high power factor flyback controller ICL8800, the board
Constant voltage (CV) secondary side regulation (SSR) system intended for use with constant current (CC) converters in LED lighting applications.
Provides the optimum topology for LED drivers with dimming capability down to 0.1% and dim to off setting.
Target applications: LED lighting, dimming functions such as dimming to off, lighting fixtures up to 125W, etc.
Reference Design - REF_ICL8810_LED_42W_PSR (with ICL8810)
A 42W reference design featuring Infineon's high power factor flyback controller ICL8810, the board
Constant voltage (CV) secondary side regulation (SSR) system intended for use with constant current (CC) converters in LED lighting applications.
PSR has a significant cost advantage over SSR, eliminating components such as optocouplers, voltage references, and error amplifiers.
Target applications: LED lighting, dimming functions such as dimming to off, lighting fixtures up to 125W, etc.
Evaluation Board - EVAL_3K3W_TP_PFC_CC with CoolMOS™ CFD7
This evaluation board is a continuous conduction mode (CCM) bridgeless totem pole power factor correction (PFC) with 600V CoolMOS™ CFD7.
system solution. 600V CoolMOS™ superjunction power MOSFET plus isolated driver, XMC™ micro
It has a controller and operates in Continuous Conduction Mode (CCM) at 65kHz.
Main Applications: Telecom SMPS, Servers, Industrial Power Supplies, etc.
Evaluation Board - EVAL-1ED3890MX12M with 1ED38xx
With a half-bridge configuration equipped with two gate driver ICs, it is possible to drive power switches such as Si MOSFETs, IGBTs, and SiC MOSFETs.
The type of switch can be freely selected. This evaluation board is used together with the evaluation board EVAL-1ED38x0DCT equipped with a microcomputer.
By receiving it, you can easily adjust the parameters.
Main Applications: Industrial Motor Drives, General Purpose Drives, Solar Inverters, UPS Systems, EV Charging, Power Storage Systems
Evaluation Board - EVAL-1ED38x0DCT with XMC4200
It is a companion board for optimal evaluation of the EiceDRIVER™ X3 1ED3890Mx12M, equipped with the XMC™ microcontroller XMC4200.
DESAT, soft-off, UVLO, Miller clamp, TLTO, and fault parameters are configurable via IC. of functions to be installed
Since parameters can be set and the number of external parts is small, design can be completed in a short period of time.
Main Applications: Industrial Motor Drives, General Purpose Drives, Solar Inverters, UPS Systems, EV Charging, Power Storage Systems
Evaluation Board - EVAL-2ED2101-HB-LLC
It is a 200W high-speed switching LLC converter with resonant ZVS in the output stage of synchronous rectification,
SOI (silicon on insulator) type level shift gate driver, 2ED2101S06F and isolation for signal control of secondary rectification stage
It is equipped with a dual-channel low-side gate driver 2ED24427N01F through a pulse transformer to secure.
Main applications: high efficiency SMPS, chargers, etc.
Inquiry
If you have any questions about Infineon products, please feel free to contact us.
Back number of new product information is here
Click here for the back number of new product information issued every month.
Infineon Manufacturer Information Top
If you want to return to Infineon manufacturer information top page, please click below.