There was a lineup of TOLL packages for MOSFETs that are thin packages and can handle large currents, but there is footprint compatibility.
The lineup of TOLG packages has increased. Longer leads compared to TOLL provide better performance for TCoB (Thermal Cycling Test)
It will come true. High efficiency, low EMI, and high power density characteristics enable high performance and overall system efficiency.
Target applications: electric scooters, forklifts, power tools, battery management systems, etc.

In addition to the advantages of large current and low profile similar to TOLL and TOLG packages that have been available in the lineup, there is a heat dissipation pad on the top surface of the package.
The TOLT package is a new topside cooling package that enables superior thermal performance. Compared to the TOLL package, TOLT has
The thermal resistance to the heatsink is reduced by up to 50%, and the amount of heat transferred through the printed circuit board is kept below 5%.
Target applications: electric scooters, forklifts, power tools, battery management systems, etc.

This product has a half-bridge gate driver, power supply, and communication interface specialized for automotive DC motor applications.
It will be a product in one package. The package is VQFN-48 pin, and the small package size of 7mm x 7mm contributes to space saving.
This IC family has a lineup with 2 or 4 half-bridge pre-drivers, and an evaluation board is also available.
Target applications: Power lift gates, HVAC flaps, seat controls, electric parking brakes, etc.

This product is a multi-MOSFET driver for automotive three-phase BLDC motor drive, power supply, and communication interface in one package.
It becomes the product. The package is VQFN-48 pin, and the small package size of 7mm x 7mm contributes to space saving. This IC family
There are two types of communication interfaces: LIN type and CAN type.
Target applications: fuel pumps, water pumps, fans, transfer cases, etc.

This DPDT offers very low insertion loss even at high frequencies up to 7.125GHz, reduced harmonics, and high isolation between RF ports.
It has come true. In addition, since high-speed switching is possible, it is compatible with 5G-SRS applications and is available in a small package of 1.1mm x 1.5mm.
It also contributes to space saving.
Target applications: RF path routing/swapping for cellular mobile devices, 5G applications, etc.

This single-stage flyback controller for constant voltage output is developed for LED lighting applications and
Industry-leading performance in terms of power factor correction and low total harmonic distortion. In addition, it does not degrade the quality of light and is optimal for a low-cost BOM.
Efficiency and low EMI can be achieved.
Target applications: lighting fixtures, adapters, chargers, flat TVs, all-in-one PCs, monitors up to 125W, etc.

Developed with 80V and 100V withstand voltages, it is a new generation MOSFET that can be considered for a wide range of applications.
Complements the well-established StrongIRFET™ MOSFET series and is suitable for both low and high switching frequencies
higher performance can be achieved.
Main Applications: Adapters, TVs, Motor Drives, Battery Management, Robots, Power Tools, etc.

It will be the first 6.5kV half-bridge module for traction applications. Low failure rate and in harsh climatic conditions
It is highly reliable and has enabled trains using this product to be operated in the field for 30 years around the world.
It also meets EN60721-3-5 Class 5K2 harsh environment operating specifications and EN45545 R22/R23HL3 fire and smoke emission standards.
Main Application: Traction Inverter

Among Infineon's AURIX™ 2nd Generation series of in-vehicle microcontrollers, we have released a low-end lineup.
In terms of performance, the T33xLP has one core running at 200MHz, a maximum of 248KByte embedded RAM, and power consumption of less than 1W.
It has the highest-class performance that enables ASIL-D design, and is also equipped with eVita Full HSM in consideration of security.
Main applications: EPS, active suspension, oil pumps, low voltage battery management systems, etc.

In applications such as automatic transmissions, stability control, and active suspension,
Automotive solenoid driver designed for controlling linear solenoids. There is a lineup of 4ch products and 6ch products in family products,
The product is 32-bit SPI controlled and supports a temperature range of -40°C to 175°C.
Main applications: automatic transmission (AMT) solenoids, etc.

iMOTION™ is a motor control IC for highly efficient control of variable speed drives (PMSM/BLDC), ready-to-use motor control
Algorithms enable faster time to market. In addition to the original lineup, flexible application requirements
To meet this demand, we have expanded the lineup of QFP-48 packages.
Main applications: Heating, ventilation, air conditioning, refrigeration/refrigeration compressor drives, etc.

The latest OptiMOS™ 6 technology provides an on-resistance of 1.2mΩ (max), making it ideal for synchronous applications.
It achieves the highest level of system efficiency and contributes to system cost reduction.
Main applications: battery-powered applications, battery management, etc.

A new logic-level 60V withstand voltage MOSFET mounted in a small package SuperSO8 and S3O8 (3.3mm x 3.3mm)
The lineup has been added. The product with the lowest on-resistance is 0.9mΩ (max), and is suitable for power tools, low-voltage drives,
Enhances existing line-up used in adapters, chargers and communication applications.
Main Applications: Power Tools, Servers, Telecoms, Chargers, Adapters, etc.

The product enables quick and easy evaluation of Infineon's innovative CO2 sensor using photoacoustic spectroscopy (PAS).
This is a developed evaluation board. Evaluation kit includes evaluation motherboard, Mini evaluation board, Micro-USB cable,
It is a software gusset downloadable from the Infineon web page.
Main applications: HVAC (heating, ventilation, cooling) systems, air quality monitors, air purifiers, etc.

This product is Infineon's innovative CO2 sensor module using photoacoustic spectroscopy (PAS). CO2 sensing
Enables rapid prototyping and design of applications. Because it uses standard pin headers,
It can be easily plugged into the target application board for flexible PCB design.
Main applications: HVAC (heating, ventilation, cooling) systems, air quality monitors, air purifiers, etc.

This reference design is an 11kW, maximum 800V bi-directional DC-DC that can be reused for DC EV charging power Box and energy storage systems.
Provides a basic configuration for quickly realizing a converter.
Main applications: 30kW to 150kW and 50kW to 350kW chargers, energy storage systems, power conversion systems, etc.

This board is equipped with TRENCHSTOP™5 WR5 IGBT IKW40N65WR5 made by Infineon.
Analog control, 2 channel interleaved 5KW PFC converter. In addition, the low side gate driver
A very effective design example is shown using the 1ED44175 and the rapid1 power silicon diode IDW60C65D1.
Main applications: high-speed EV power supply, home air conditioner, etc.