The LTM3360B is a high-current, high-density, low-voltage step-down power μModule® regulator optimized for high-output current applications. It supports an input voltage range of 2.9V to 5.5V and intermediate bus voltages (IBV) of 5V ±10% or 3.3V ±10%. With parallel 33A current outputs and multi-phase operation stacked in a main/slave device configuration, it can supply over 1000A. Furthermore, it achieves a regulated output voltage of as low as 0.3V using a current-mode architecture that supports very high frequencies and short on-times. The output voltage can be set by selecting an appropriate feedback signal resistor divider.
*Manufacturer's product page: LTM3360B

■ Application
• Power supplies for data center xPU cores, application-specific integrated circuits (ASICs), and FPGAs.
Optical module
Industrial and communications
• Distributed DC Point of Load (POL) power system

■ Evaluation board
・ EVAL-LTM3360B-AZ

The MAX77726/MAX77727 provides power supply solutions for ultra-low power applications where size and efficiency are critical. It features 4.6A inductor peak current protection and can deliver output currents up to 3A.

The MAX77726's output voltage can be logically set to four specific output voltages via the VSEL pin. Intuitive control is possible through the setting of the physical enable and mode pins.

The output voltage of the MAX77727 can be programmed via _I2C. Mode switching is also possible and can be selected via the _I2C interface and status reading.
*Manufacturer's product page: MAX77726 / MAX77727

■ Application
USB power supply device
Portable electronic devices
• 12V distributed power bus applications

■ Evaluation board
・ MAX77726EVKIT
・ MAX77727EVKIT

The LT7176 / LT7176-1 is a monolithic PolyPhase DC/DC synchronous buck regulator capable of continuously outputting up to 24A of current. The LT7176-1 option features two switching phases, connected to two inductors to drive a single regulated output power supply. Its fast, clean, and low-overshoot switching edge ensures high efficiency while minimizing electromagnetic interference (EMI) emissions. ₂ The C-based PMBus 1.3 compliant serial interface allows for control of device functions while providing telemetry information for system monitoring. The LT7176 / LT7176-1 supports LTpowerPlay. ^® It supports graphical user interface (GUI) tools.
*Manufacturer's product page: LT7176 / LT7176-1

■ Application
• Communications, storage, and industrial systems
Data centers and semiconductor drives

■ Evaluation board
・ EVAL-LT7176-AZ
・ EVAL-LT7176-1-AZ

The LT8060x is a Silent Switcher. ^® This family of buck regulators features a silent switcher architecture, achieving high efficiency at frequencies up to 3MHz while minimizing electromagnetic interference (EMI) emissions. The LT80602 can supply up to 2.5A of continuous current, and the LT80603 up to 3.5A. With an extremely low quiescent current of 8μA when the output is fully regulated, it is suitable for applications requiring maximum efficiency at light loads. The EN/UV pins allow for setting high-precision enable thresholds, and the RT pin resistor allows for programming the switching frequency.
*Manufacturer's product page: LT80602 / LT80603

■ Application
General-purpose step-down converter
• Automotive and industrial power supplies

■ Evaluation board
LT80603EVKIT

The TMC2241 is a smart high-voltage stepping motor driver IC with step and direction control and a serial communication interface. This device also features an industry-leading stepping motor driver with 256 microsteps, an embedded indexer, two fully integrated 65V, 3.0A MAX H-bridges, and integrated current sensing (ICS) with no power dissipation.

Analog Devices' Trinamic StealthChop2 chopper enables completely noise-free operation, achieving both maximum efficiency and maximum motor torque.
*Manufacturer's product page: TMC2241

■ Application
Textiles, sewing machines, knitting machines
• Lab automation and factory automation
ID printer / Card printer
Liquid handling, medical applications
Office automation and paper handling
POS, massage chairs
ATMs, cash collection machines, banknote recognition machines, automated teller machines
CCTV, security
• Pump and valve control
- Positioning of heliostats and antennas
Stage lighting

■ Evaluation board
・ TMC2241-EVKIT

The AD5706R is a 4-channel, 16-bit resolution, low-noise, current-output programmable digital-to-analog converter (DAC). This device is ideal for applications such as photonic control and current-mode biasing. It features a 2.5V voltage reference, load DAC, A/B toggle, and dithering capabilities. An integrated multiplexer allows monitoring of supply voltage, output voltage, output current, and internal die temperature.

The AD5706R supports multiple programmable output current ranges (up to 300mA). Addressable pins allow up to four devices to communicate by sharing a single SPI bus.
*Manufacturer's product page: AD5706R

■ Application
Photonics control
Optical communication
LED driver programmable current source
- Current mode bias supply

■ Evaluation board
・ EVAL-AD5706R

The AD5710R features eight DAC channels that can be individually configured as current output digital-to-analog converters (IDACs) or voltage output digital-to-analog converters (VDACs). The AD5710R includes a built-in 2.5V, 3ppm/°C reference. When the AD5710R's output is configured as an IDAC, the output current range is 0mA to 50mA. When configured as a VDAC, the output voltage range is 0V to VREF, or 0V to 2 x VREF.

The AD5710R utilizes a 25-ball wafer-level chip-scale package (WLCSP) and is specified for a temperature range of -40°C to +125°C.
*Manufacturer's product page: AD5710R

■ Application
Optical networking
• Measuring instruments
Data acquisition
ATE (Automated Testing Equipment)
• Process control and industrial automation

■ Evaluation board
・ EVAL-AD5710R

The ADMX3651, a 6½-digit digital voltmeter (DVM), offers high throughput (1 kSPS), flexible measurement methods (manual or automatic range selection), and reliable results (6 ppm measurement accuracy on the 1 V range for 30 days). The ADMX3651 provides a compact solution for the most common DVM measurement parameters. Its simple, reliable, and compact size makes it a popular and widely used choice for applications requiring long measurement times, high integration, and high accuracy—essentially saving system space.
*Manufacturer's product page: ADMX3651

■ Application
• High-precision voltage measurement
• Industrial automated testing

■ Evaluation board
・ EVAL-ADMX3652