The AD4851/AD4853 are fully buffered, 16-bit data acquisition systems (DAS) that simultaneously sample four channels. The AD4851 provides a throughput of 250 kSPS, while the AD4853 provides a throughput of 1 MSPS. They have differential inputs with wide common-mode voltage ranges, operate from a low voltage supply of 5 V, flexible input buffer supplies, and use a precision low drift internal reference and reference buffer.

The product allows you to independently set the SoftSpan range for each channel to match the signal amplitude of your application, minimizing the need for additional external signal conditioning. To further improve the single conversion dynamic range, Seamless High Dynamic Range (SHDR) technology is employed. When enabled, the input signal path gain of a channel is automatically optimized on a sample-by-sample basis to minimize converter noise for each sample without affecting linearity.
*Manufacturer product page: AD4851 / AD4853

■ Applications
ATE (Automatic Test Equipment)
Avionics and aerospace
- Instrumentation and control systems
・Semiconductor manufacturing
Testing and measurement

■ Evaluation board
・ EVAL-AD4857

The AD4852/AD4854 are fully buffered, 20-bit data acquisition systems (DAS) that simultaneously sample four channels. The AD4852 provides a throughput of 250 kSPS, while the AD4854 provides a throughput of 1 MSPS. They have differential inputs with wide common-mode voltage ranges, operate from a low voltage supply of 5 V, flexible input buffer supplies, and use a precision low drift internal reference and reference buffer.

The product allows you to independently set the SoftSpan range for each channel to match the signal amplitude of your application, minimizing the need for additional external signal conditioning. To further improve the single conversion dynamic range, Seamless High Dynamic Range (SHDR) technology is employed. When enabled, the input signal path gain of a channel is automatically optimized on a sample-by-sample basis to minimize converter noise for each sample without affecting linearity.
*Manufacturer product page: AD4852 / AD4854

■ Applications
ATE (Automatic Test Equipment)
Avionics and aerospace
- Instrumentation and control systems
・Semiconductor manufacturing
Testing and measurement

■ Evaluation board
・ EVAL-AD4858

The AD4130-4 is an ultra low power, high precision measurement solution for low bandwidth battery powered applications. The fully integrated analog front end (AFE) includes a multiplexer for up to eight single-ended or four differential inputs, a programmable gain amplifier (PGA), a 24-bit sigma-delta (Σ-Δ) analog-to-digital converter (ADC), an on-chip reference and oscillator, selectable filter options, a smart sequencer, sensor bias and excitation options, diagnostic capabilities, and newly added features to improve battery operating life (>5 years with coin cells): first-in, first-out (FIFO) buffer and duty cycle.
*Manufacturer product page: AD4130-4

■ Applications
・Smart transmitter
Wireless battery and harvester powered sensor nodes
・Portable measurement
- Temperature measurement: thermocouple, RTD, thermistor
Pressure measurement: Bridge transducer
Healthcare and wearables

The ADAQ4216/ADAQ4224 are μModule® precision data acquisition (DAQ) signal chain solutions that shorten the development cycle of precision measurement systems by transferring the signal chain design challenges of component selection, optimization, and layout from the designer to the device. The ADAQ4216 ensures ±3 ppm maximum INL and no missing codes to 16 bits, and the ADAQ4224 ensures better than ±1.0 ppm INL, no missing codes to 24 bits, providing unmatched precision performance from −40°C to +105°C.

This product uses System in Package (SIP) technology to integrate common signal processing blocks required for data acquisition solutions into a low-footprint 178-ball CSP_BGA package (14 mm x 9 mm, 0.8 mm pitch).
*Manufacturer product page: ADAQ4216 / ADAQ4224

■ Applications
ATE (Automatic Test Equipment)
Machine Automation
Process control
・Medical and industrial measuring equipment
・Digital control loop

■ Evaluation board
EVAL-ADAQ4216-FMCZ
・ EV-ISO-4224-FMCZ
・ EVAL-ADAQ4224-FMCZ

The LTM4707 is a complete 16A step-down Silent Switcher 3 power μModule® (power micromodule) regulator in a small 6.25mm x 6.25mm x 5.07mm BGA package. The package includes the switching controller, power MOSFETs, inductor and supporting components. The LTM4707 operates over an input voltage range of 3V to 16V and supports an output range of 0.3V to 6V. A single resistor sets the output voltage, allowing unity-gain operation over the entire output range, resulting in nearly constant output noise regardless of output voltage. Only bulk input and output capacitors are required to complete the design.
*Manufacturer product page: LTM4707

■ Applications
・Telecommunications, networks, industrial equipment
・RF power supplies including PLL, VCO, mixer, LNA, PA, etc.
・Low noise measuring instruments
- High-speed and high-precision data converter

■ Evaluation board
・ EVAL-LTM4707-AZ

The LTM4640 is a complete 20A step-down switching mode power μModule® (micromodule) regulator in a tiny 6.25mm x 6.25mm x 5.07mm BGA package. The package includes the switching controller, power MOSFETs, inductor and supporting components. The LTM4640 operates over an input voltage range of 3.1V to 20V and provides an output voltage range of 0.6V to 3.3V, set by a single external resistor. Its high efficiency design delivers up to 20A of continuous output current. Only bulk input and output capacitors are required.
*Manufacturer product page: LTM4640

■ Applications
・Telecommunications, data communications, networks, industrial equipment
・Medical diagnostic equipment
Data storage rack devices and cards
Test and debug systems

■ Evaluation board
・ DC3107A

The LTC® 7892 high performance dual boost DC/DC switching regulator controller is capable of driving any N-channel synchronous Gallium Nitride (GaN) field effect transistor (FET) power stage up to 100V from the output voltage. The LTC7892 solves many of the challenges previously faced when using GaN FETs. The LTC7892 simplifies application design compared to silicon metal oxide semiconductor field effect transistor (MOSFET) solutions while eliminating the need for additional protection diodes and other external components.
*Manufacturer product page: LTC7892

■ Applications
・Automotive and industrial power systems
Defense avionics and medical systems
・Telecommunications power supply systems

■ Evaluation board
・ EVAL-LTC7892-BZ

The ADF4382 is a high performance, ultralow jitter fractional-N phase-locked loop (PLL). It features an integrated voltage controlled oscillator (VCO) suitable for data converter clock applications or local oscillator (LO) generation for 5G applications. This high performance PLL has a figure of merit of −239 dBc/Hz, low 1/f noise, and a high PFD frequency (625 MHz in integer mode) that allows for extremely low in-band noise and integrated jitter. The ADF4382 can generate frequencies in the fundamental octave range of 11 GHz to 22 GHz, eliminating the need for subharmonic filtering. The ADF4382 output divider allows for the generation of the full output frequency range of 687.5 MHz to 22 GHz.
*Manufacturer product page: ADF4382

■ Applications
・Clock supply for high performance data converters
・Wireless Infrastructure (MC-GSM, 5G, 6G)
Testing and measurement

■ Evaluation board
EVAL-ADF4382

The Apollo Mixed Signal Front End (MxFE®) is a highly integrated device that integrates a 16-bit RF digital-to-analog converter (DAC) core with a maximum sampling rate of 28 GSPS and a 12-bit RF analog-to-digital converter (ADC) core with a maximum sampling rate of 20 GSPS. The AD9084 supports four transmit and four receive channels and is ideal for applications where wideband ADCs and DACs are required to process signals with wide instantaneous bandwidth.

The device features 48 lanes of 32.5Gbps JESD204C or 20Gbps JESD204B data transceiver ports, on-chip clock multipliers and digital signal processor (DSP) functionality targeted at wideband or multiband DC-to-RF applications. It also features a bypass mode to bypass the DSP datapath and use the full bandwidth capabilities of the ADC and DAC cores. It also features low latency loopback and frequency hopping modes targeted at phased array radar systems and electronic warfare applications.
*Manufacturer product page: AD9084

■ Applications
Radar and communications
- L/S/C/X/Ku band radar and electronic warfare
Phased Array System
・Broadband communication systems
Electronic test and measurement equipment
Satellite communications
Microwave point-to-point, X-band, and 5G mmWave

■ Evaluation board
・ ADS10-V1EBZ

The AD8412A is a high voltage, high bandwidth current sense amplifier. It has an initial gain of 10 V/V, a bandwidth of 1.8 MHz, and a maximum gain error of ±0.11% over temperature. The buffered output voltage directly interfaces with any standard converter. The AD8412A has a minimum dc common-mode rejection ratio (CMRR) of 110 dB from −2 V to +50 V. The AD8412A performs bidirectional current measurements across a shunt resistor for a variety of industrial and automotive applications.
*Manufacturer product page: AD8412A

■ Applications
In-phase or high-side current sensing
- Motor control for BLDC motors, low inductance motors
- Bidirectional 48V to 12V DC/DC converter
- Solenoid Control
- Power Rail Monitoring
・Low side current detection

■ Evaluation board
EVAL-AD8412A

The ADIN3310 is a 3-port Gigabit Ethernet Time Sensitive Networking (TSN) switch with integrated security, designed primarily for industrial Ethernet applications. Each port can be configured to operate at a different speed. These switches have an unallocated Media Access Control (MAC) interface and can be combined with Analog Devices physical (PHY) layer devices such as the ADIN1100, ADIN1200, and ADIN1300 to create low power, low latency systems.

Four Serial Gigabit Media Independent Interfaces (SGMII) and Serializer/Deserializer (serdes) interfaces provide connectivity to backplane connections, SFP modules, and cascaded switches. The switch supports a set of bridging functions for IEEE 802.1Q Time Sensitive Networking as required by the IEEE 60802 standard, providing high quality of service (QoS) for latency-sensitive streams. The device also includes hardware capabilities to support Parallel Redundancy Protocol (PRP) or High Availability Seamless Redundancy (HSR) protocols, which offloads the host processor.
*Manufacturer product page: ADIN3310

■ Applications
・Factory and process automation
・Motion control, robots, collaborative robots
Energy Automation
·transportation
Measuring instruments
Building Automation

■ Evaluation board
・ EVAL-ADIN3310

The AD3530/AD3530R are low power, 8-channel, 16-bit, buffered voltage-output digital-to-analog converters (DACs) with software programmable gain control and a full-scale output span of 2.5 V or 5 V for a 2.5 V reference voltage. The device operates from a single power supply ranging from 2.7 V to 5.5 V and is guaranteed monotonic by design. The AD3530R also features an internal 2.5 V, 5 ppm/°C reference (disabled by default).
*Manufacturer product page: AD3530 / AD3530R

■ Applications
・Optical transceiver
Testing and measurement
Industrial automation
Data Acquisition System

■ Evaluation board
・ EVAL-AD3530R

The TMCM-3216 is a compact 3-axis bipolar stepper motor controller and standalone driver board that supports up to 3 bipolar stepper motors with up to 2ARMS motor coil current and offers standard 24VDC (10V to 30V range) single-supply operation.

There are individual reference/stop switches and incremental A/B/N encoder inputs for each motor axis. Additionally, the module provides four configurable digital inputs and outputs that can be configured as push-pull or high-side outputs. The two analog inputs support 0V to 10V signals.

A USB interface is available for configuration and updates, while RS485 and CAN bus interfaces are available for intra-system communication or daisy-chaining of boards to simplify wiring via bus connectors on both ends of the board.
*Manufacturer product page: TMCM-3216

■ Applications
Industrial automation
Laboratory automation
Medical equipment