Overview of Bluetooth® SMART module (konashi compatible)
The Bluetooth® SMART module "Koshian™3.0" is a breakthrough that enables easy rapid prototyping without the need for hardware design for "makers" aiming to develop IoT devices and wearable devices. development kit. Koshian™3.0 is a konashi-compatible Bluetooth® SMART module that implements Silicon Labs' BGM11S12F256 (Technical Conformity Mark, FCC certified) and original firmware. Koshian™3.0 can be mounted on a konashi base board or a konashi miniaturized expansion board for easy use, and can also be mounted on a breadboard or universal board by itself. By using this Koshian™3.0 module, makers can easily transition from prototyping of IoT products using konashi to prototype development for mass production and mass production design.
Product Specifications
| Model | MP-KSN003A |
| size | 10.2mm x 21.6mm x 2.2mm |
| Built-in Bluetooth® device | Bluetooth® Smart SiP BGM11S12F256 (Silicon Labs)
|
| communication interface | I2C, UART, SPI, PWM, GPIO, A/D, D/A, SPI |
| External connection connector | DF40C-20DP-0.4V(51) 20pin (HIROSE) and end face through holes (1.27/2.54mm pin pitch) can be connected to breadboards and universal boards |
| Offerings | Koshian3.0™ Module, Manual, Schematic |
Interface comparison between konashi and Koshian™3.0
| interface | konashi | Koshian™(konashi2.0) | Koshian3.0™ (konashi3.0) |
| UARTs | ○ | ○ | ○ |
| I2C | ○ | ○ | ○ |
| GPIOs | ○ | ○ | ○ |
| PWM | ○ | ○ | ○ |
| A/D | ○ | ○ | ○ |
| D/A | ○ | × | ○ |
| SPIs | × | ○ | ○ |
For more information on konashi, please refer to the web page provided by Yukai Engineering.
http://konashi.ux-xu.com/documents
By connecting the konashi-compatible IoT sensor shield Uzuki™, you can easily acquire sensor data installed in Uzuki™ with a user application without soldering. Please refer to the link below for the sample source code of Uzuki™.
JavaScript: http://jsdo.it/mpression/codes
Objective-C: https://github.com/mpression
For details on BGM11S12F256 (technical conformity mark, FCC certified), please refer to the web page provided by Silicon Labs.
https://www.silabs.com/community/wireless/bluetooth
The built-in Bluetooth® of Koshian3.0 is a proprietary specification for short-range communication. If you need a long-distance evaluation up to 200m, we recommend using the manufacturer's evaluation board (SLWSTK6101C).
Koshian on Konashi Base
The picture is Koshian implemented on the Konashi base.
Of course, it can also be mounted on the Konashi miniaturized expansion board.
Click here for recommended articles/materials
Click here to purchase products
Koshian3.0 - Bluetooth SMART module (konashi compatible) MP-KSN003A