Sensor terminal with SmartMesh IP
Equipped with Analog Devices SmartMesh IP, you can automatically build a mesh network just by turning on the power. The sensor is equipped with a gas sensor that can measure TVOC (Total Volatile Organic Compound), one of the environmental indicators, and wirelessly measures the total VOC concentration used as an indicator of pollution. It is a possible sensor terminal. In addition, temperature, humidity, illuminance, and acceleration sensors are also installed.
function
-By connecting the master USB Network Manager DC2274A (Analog Devices) to a PC or Gateway, it is possible to automatically build a mesh network and collect various sensor data.
● Measures TVOC (Total Volatile Organic Compound), temperature, humidity, illuminance, and acceleration sensor data
-Cloud connection via 3G or LTE Cat.4 cellular line is also possible via CANDY LINE's CANDY Pie Lite and CANDY Pie Lite+(Plus) Gateway.
Connection example
Overview of EH-Terminal
| External dimensions | Length x Width x Height = 115mm x 69mm x 28mm |
| Operating temperature limit | 0～50℃ |
| Wireless communication | 2.4GHz Band Analog Devices SmartMesh IP |
| Installed sensor |
|
| power supply | 2 x AA batteries |
| Data transmission cycle | Initial value 30 seconds (can be changed with Data Logger of bundled SW) |
*Product appearance and specifications are subject to change without notice for improvement.
SmartMesh IP benefits and applications
- No special knowledge or settings are required for mesh connection between sensor nodes. The mesh network is automatically configured just by turning on the power of the sensor terminal.
- Once configured, the mesh network automatically optimizes itself even if the wireless environment temporarily deteriorates due to its self-healing function.
- When the radio wave environment is poor, when additional terminals are installed, they are automatically added to the existing mesh network and optimized, reducing the user's installation burden.
Form of provision
| EH-Terminal G2S Starter Kit | Child device: EH-Terminal G2S (sensor terminal) x 1 Main unit: USB Host adapter (Analog Devices DC2274A) x1 Data logger (original software) |
| additional terminal | EH-Terminal G2S (sensor terminal) x 1 |
*Batteries must be purchased separately.
data sheet
The password is included in the guide after purchase. If you would like to refer to the data sheet, please contact us separately.