EasyMVC Machine Vision Camera Development Kit
Overview
EasyMVC stands for Easy Machine Vision Camera and is a product for hardware and software engineers involved in the development of machine vision systems.
This kit consists of an image sensor board, an FPGA board, and an interface board. You can do it without troublesome setup work. In addition, hardware and software sample designs are also provided, which is useful for short-term and low-cost development.
【Note】
*This product is intended for pre-purchase evaluation of our IP cores (SLVS-EC, GigE Vision, USB3 Vision, CoaXPress).
* If you purchase for purposes other than the above, we cannot provide technical support.
feature
● Easier evaluation of key technologies for machine vision cameras
〇 State-of-the-art CMOS image sensor
〇 Various machine vision interfaces
○ IP core provided by Macnica
● Facilitates prototype development of machine vision cameras
〇FPGA design
〇Firmware development
〇 Host PC side software development, etc.
Basic configuration
Target lineup and schedule
Target lineup by combining sensors, FPGAs, and machine vision interfaces
Model | Sensor | Color | FPGA | MV Interface | Release |
EasyMVC Sony IMX420MS/CS C10 HDMI U3V Kit | Sony IMX420 | Mono/Color | Cyclone® 10GX | HDMI® 2.0 & USB3 Vision® | Released |
EasyMVC Sony IMX420MS/CS C10 Coax1.1 Kit | Sony IMX420 | Mono/Color | Cyclone® 10GX | CoaXPress® 1.1.1 | Released |
EasyMVC Sony IMX421MS C10 Coax1.1 Kit | Sony IMX421 | Mono | Cyclone® 10GX | CoaXPress® 1.1.1 | Released |
EasyMVC Sony IMX420CS/MS C10 Coax2.0 Kit | Sony IMX420 | Mono/Color | Cyclone® 10GX | CoaXPress®2.0 | under consideration |
EasyMVC Sony IMX421CS/MS C10 10GigE Kit | Sony IMX421 | Mono | Cyclone® 10GX | 10GigE Vision with 1588 | Released |
EasyMVC Sony IMX420MS/CS C10 HDMI U3V Kit
hardware image
Main function
●Image sensor board
* Sony IMX420
・SLVS-EC 8 lane output
・Global shutter
・7M pixels
●FPGA board
〇Intel Cyclone® 10 GX
・10CX150YF780E5G
●Interface board
〇HDMI® interface
・TV monitor connection
〇USB3.0 interface
・PC connection
・USB3 Vision® support
FPGA block diagram
Bundled items
●Hardware
〇IMX420 CMOS sensor board
〇Cyclone® 10 GX FPGA board
〇HDMI®2.0 and USB 3.0 machine vision interface board
●Software
〇Sample design
・FPGA design
・Software tool (Windows® version)
・GenICam® middleware evaluation version
・GenICam® application
〇 IP core for evaluation (upon request)
・SLVS-EC Rx IP
・HDMI®2.0 Tx IP
・USB3 Vision® IP
EasyMVC Sony IMX420MS/CS C10 Coax1.1 Kit / EasyMVC Sony IMX421MS C10 Coax1.1 Kit
hardware image
Main function
●Image sensor board
〇 For EasyMVC Sony IMX420MS/CS C10 Coax1.1 Kit: "IMX420 CMOS sensor board"
(same as "EasyMVC Sony IMX420MS/CS C10 HDMI U3V Kit")
〇 For EasyMVC Sony IMX421MS C10 Coax1.1 Kit: "IMX421 CMOS sensor board"
●FPGA board
〇 Same as "EasyMVC Sony IMX420MS/CS C10 HDMI U3V Kit"
●Interface board
〇CoaXPress® interface (DIN connector)
〇25Gbps (6.25Gbps x4 connections)