"TIOL111-5" transceiver compatible with IO-Link standard

TIOL111-5 is an IO-Link transceiver provided by Texas Instruments.

IO-Link is an I/O connection technology standardized in "IEC 61131-9".
In the past, serial communication and analog/digital signals were mixed for each sensor and actuator in factory equipment, and there were issues such as troublesome wiring and difficulty in identifying abnormal locations.

By adopting IO-Link in factory equipment, digital two-way communication can be performed seamlessly.

The TIOL111-5 has the following major features and benefits.

1. Easy IO-Link interface
2. "2.5mm x 3.0mm" Industry's smallest package size
3. Integrated surge protection reduces external components
4. Easy connection with microcomputers with simple communication

Each feature is explained below.

4. Easy connection with microcomputers through simple communication

A simple interface that can be controlled by pin H/L makes it easy to connect to microcomputer circuits.

Evaluation module for developing TIOL111-5

The TIOL111-5EVM enables rapid development of IO-Link systems using the TIOL111-5.

This evaluation board can be evaluated immediately by following the steps below.

1. Connect the IO-Link cable to IOLink on the evaluation board.
2. Connect the evaluation board to a DC power supply. Monitor the CQ signal on an oscilloscope or connect it to a test load.
3. Allows the evaluation board to drive the TX and EN inputs and measure the RX, WAKE, and NFAULT outputs.

Application example

• IO-Link sensors and actuators
• factory automation
• process automation

Product Summary

Inquiry