Narrow down by specifying conditions
現在1888件がヒットしています。check
Overview of SMOD701
The SMOD701 is an evaluation kit that allows you to easily evaluate the hydrogen gas sensor SGAS701 provided by Renesas (formerly IDT).
This evaluation kit can measure hydrogen gas in air.
It also has the following features.
- The evaluation kit is equipped with a sensor mounting socket, JTAG, USB connector, and control microcomputer. Therefore, evaluation can be performed immediately after connecting to a PC via USB.
- Since the power supply is controlled by the evaluation board, operation can be performed simply by supplying 9VDC power from an external source.
- An operable program is written in the control microcomputer at the time of shipment. So you can start evaluating right away with no setup required.
- It supports all modes for operating sensors. (feedback heater control, temperature and sensor measurement sequences)
- A simple ASCII-based communication protocol allows communication with a host controller.
- Compatible with digital interfaces. Full speed USB standard.
Hydrogen gas sensor capable of detection from as little as 1 PPM
The hydrogen gas sensor SGAS701 can detect hydrogen concentration in the air.
High-sensitivity MOx material (metal oxide material) suitable for detecting hydrogen is used, and Renesas' unique technology utilizing physical adsorption and chemical adsorption achieves high accuracy and high reliability.
Therefore, it is suitable for industrial applications that require high reliability.
- Detectable gas (1 to 1000 ppm)
- hydrogen
- Major features
- High sensitivity even at low hydrogen concentration (10-1000ppm)
- Fast response (15 seconds, at 100ppm)
- Main Specifications
- Heater power consumption: 600mW (Vh=5.4[v])
- Heater voltage: 5.4V (typ)
- Heater resistance: 30Ω (typ)
- Operating voltage: 2.5-5.0 (V)
- Operating temperature range: -20°C to +50°C
- Output: Voltage
- Package: 4-pin TO-39
- Characteristics (concentration and sensor resistance)
Contents of SMOD701 for easy evaluation of hydrogen gas sensors
The SMOD701 evaluation kit can be connected to a Windows PC via a USB connection and can be viewed (graph display) and controlled by the provided software.
The application software can be downloaded from the Renesas website and is a LabVIEW® executable application.
Just 15 minutes, connect to PC and start evaluation immediately
This evaluation kit is ready for immediate evaluation with the following steps:
1. Install application software
Download it from the Renesas website and install it on your PC. Application software is free.
2. Set up your hardware
The SMOD701 is powered by the included AC adapter. Connect the USB cable to your PC.
3. Starting the application software
Measurement and evaluation can be performed immediately using the application software.
Application example
- Gas concentration detection
- breath detection
- Exhaled breath, skin gas analysis
- Hydrogen gas analysis of dialysate
- Trace hydrogen gas detection
Product Summary
| Type name | SMOD701KITV1 * Dedicated evaluation board for Integrated Device Technology products. |
| Features | PCB evaluation board with SGAS701 (trace hydrogen sensor) |
| Included contents |
|
| JTAG interface (J1) | Used for firmware debugging and flash writing |
| Power connector (J2) | 9VDC input |
| USB interface (J3) | USB2.0 interface |
| Power LED | Power LED illuminates when the SMOD7xx module is connected to power via USB |
| USB Power LED | The USB Power LED illuminates when the SMOD7xx module is connected to the user's computer via USB |
| sensor socket | SGAS7xx sensor lead pin sockets |
Click here for recommended articles/materials
Features of the gas sensor evaluation kit "SMOD707" that can detect air pollution TVOC
Features of the evaluation kit "SMOD711" that can detect combustible gases such as methane and propane
What is a sensor? Basic knowledge for digitization and IoT
Click here to purchase products
Click here for manufacturer site/other related links
SMOD701 Product Information
SGAS701 product information