ATWINC1510 is a Wi-Fi module provided by Microchip.
Here, we will explain the "ATWINC1510" with a built-in antenna that can be designed in a short period of time.
Features of ATWINC1510
This Wi-Fi module has the following features:
- Supports IEEE802.11 b/g/n
- Ultra-low power consumption: TX172mA, RX70mA, Doze380μA
- SPI interface
- Operating temperature range: -40~85 degrees
- 8MB flash memory with system software expansion
- Ultra small size: 21.72 x 14.73 x 2.11mm
- Radio wave certified Ready to use in Japan, US, Canada, Europe and India
- Short development time due to built-in stack
- Operating Voltage: 2.7-3.3V
In particular, since it has an SPI-to-Wi-Fi interface and a built-in protocol stack, it is possible to extend Wi-Fi functionality to existing microcontrollers with minimal load.
Three development environments that can be selected according to the user's environment
The ATWINC1510 has the following three development environments for quick evaluation. All of them are designed so that you can immediately evaluate them using the sample code.
1. WINC1500 PICtail/PICtail Plus Daughter Board for PIC microcomputers
If you are using a PIC microcontroller in your existing application, this board is perfect.
Because it supports the "PICtail/PICtail Plus" interface, you can directly connect the Daughter Board to the PIC microcomputer development board and start evaluation immediately.
The figure below shows the Daughter Board connected to the PIC18 EXPLORER BOARD.
2. Starter kit "ATWINC1500-XSTK"
This development board is a starter kit for evaluating the Wi-Fi module "ATWINC1510".
All hardware is provided to start evaluating the ATWINC1510.
The package is as follows.
- SAMD21 Xplained Pro with Arm® Cortex®-M0
- WINC1500 Xplained Pro Extension board with Wi-Fi module
- I/O1 Xplained Pro Extension board with illuminance sensor, temperature sensor and MicroSD
- Two USB Type A to Micro B Cables (1.5m)
Development can be started immediately using the integrated development environment "Atmel Studio" and sample code.
3. ATWINC1500 Xplained Pro expansion board
Expansion board for the Xplained Pro evaluation platform.
If you are already using the SAMD21 Xplained Pro evaluation board, you can use the expansion board to start evaluation right away.
Development can be started immediately using the integrated development environment "Atmel Studio" and sample code.
Application example
- IoT application
- smart appliances
- multimedia streaming
- safety and security
- home automation
- consumer electronics
- industrial automation
Product Summary
Type name | ATWINC1510 |
Features |
|
Click here for recommended articles/materials
[FAQ] Microchip Bluetooth/Wi-Fi: Which countries have wireless certification for Bluetooth/Wi-Fi module products?
[FAQ] How can I update the firmware of the WINC15x0 series?
Click here to purchase products
ATWINC1510-MR210PB1952
WINC1500 PICtail/PICtail Plus Daughter Board
ATWINC1500-XSTK Xplained Pro starter kit
ATWINC1500-XPRO
Click here for manufacturer site/other related links
ATWINC1500
WINC1500 PICtail/PICtail Plus Daughter Board
ATWINC1500-XSTK Xplained Pro starter kit
ATWINC1500-XPRO