Introduction
Although it has been several years since the Extend Power Range (EPR) standard was introduced, there are still not many environments in which it is possible to evaluate power levels above 100 W. Here we introduce an evaluation board that Macnica has independently developed to evaluate power control at 140 W.
PowerDelivery140W power control evaluation board
Equipped with Infineon Power Delivery. Detailed operation verification of EPR (Extend Power Range) is possible!
We are also planning to release a board that can control Source/Sink and DP Alternate mode (Source) using the EZ-PD™ PMG1 High Voltage USB-C Microcontroller.
It is also ideal as a subject for in-house training on Type-C PD.
Target application
Printers / Scanners
camera
Robot
Generator
Battery Charger
Power tools
Board Features
・USB-PD3.2 compatible, EPR compatible (MAX 140W)
- Many test/jumper pins (power switching, current measurement, waveform measurement, etc.)
-Can be used with 140W PD adapter and charging purposes
・VIN input evaluation possible using a stabilized power supply
・F/W rewritable (using Miniprog4)
Board Block Diagram
Board appearance
Board Specifications
| type name | TSCPDCDRPEPRB |
| Number of Type-C ports | 1 |
| connector | Receptacle |
| USB3.0 communication compatible | DRD(DualRoleData) |
| PowerRole | DRP(DualRolePower) |
| SourcePDO | 5V/3A、9V/3A、12V/3A、15V/3A、20V/5A、28V/5A |
| SinkPDO | 5V/3A、9V/3A、12V/3A、15V/3A、20V/5A、28V/5A |
| Non-USB communications | Display port Alternate Mode 1.2 (ALT 4 Lane compatible: Sink DP *Planned) |
Component part
USB Controller:CYPM1311-48LQX
DCDC MOSFET: ISC0702NLS
VBUS control MOSFET1: BSZ040N06LS5
VBUS control MOSFET2: ISC240P06LM
If you want to actually try it out and evaluate it, click here
Both rental and purchase options are available, so please contact us for more information.