JANOG53 Meeting in Hakata [Event Report]

Macnica participated in the JANOG53 Meeting in Hakata held from January 17th to 19th, 2024.

JANOG53 Macnica exhibit

The scale of the event is even bigger!

JANOG (JApan Network Operators' Group) 53 Meeting in Hakata was held at the Hakata International Exhibition Center & Conference Center, located about a 15-minute walk from Hakata Station.

The number of sponsoring companies and participants has increased each time, but this time the number of local participants exceeded 3,000, which was even bigger and more exciting than the 2,300 people last time. it was done. Although the event is growing rapidly, the characteristics of JANOG, which is close and homely to visitors, has remained unchanged.

In this article, we will introduce the contents of the Company exhibition at JANOG53, which was once again a great success, as well as the very popular social gathering and BoF.

Macnica exhibited at four booths.

What was unique about this time was that there were more visitors from the first day than last time, and the venue was buzzing with excitement right after it opened. the Company exhibited at four booths, each with the following themes.

・Optical transceiver module

・Network for generative AI

·security

・Open networking

Macnica booth

optical transceiver module

We held two demonstrations at the introduction booth for "Building a 100GB long-distance network!" The first is a demonstration of long-distance transmission using Coherent's new product, the optical transceiver module "100G-ZR QSFP28 DCO." We saw how the DSP developed by Coherent enabled error-free transmission of 80 km without the need for an optical amplifier while consuming low power, and we received surprised and happy responses from many people who said, ``5W of power consumption is quite impressive!'' Ta. Flextune™ is scheduled to be installed in the product in the summer of 2024, when sales are said to start, and we have heard that there are expectations for the automatic wavelength setting function. The second is a demonstration using MultiLane's module evaluation board "ML4041-K." Many visitors were interested in seeing the functions that can be used to check and configure the memory map of an optical transceiver module using the ML4041-K's dedicated GUI.

JANOG53 Macnica booth

Network for generative AI

We have explained the network configuration required in the generation AI era. The key to maximizing the performance of generative AI is that the network that connects the large number of GPU servers that perform parallel distributed processing is high-speed, low-latency, and lossless. ``NVIDIA Spectrum-X'' for generative AI consists of the ``NVIDIA Spectrum-4'' switch with a maximum port speed of 800 Gb/s and the accelerator ``NVIDIA BlueField-3DPU'' installed on the server side that supports up to 400 Gb/s. I am. Macnica proposes the optimal network for each application you want to implement.

Click here for NVIDIA manufacturer TOP

JANOG53 Macnica booth

open networking

Macnica unifies "product combinations and maintenance/support distribution"! When building a network, we introduced "What is the best choice you can make in terms of cost, performance, quality, and support?" Learn more about open networking here.

Seminar videos that help you quickly understand “open networking” are also available

 

P4 language x FPGA accelerator reduces CPU resources and delays, and greatly improves performance! You saw a demo that implements an essential function for telecom carriers (automatic entry expiration).

Click here to download this solution overview document

JANOG53 Macnica booth

security

We introduced the Skyhigh SSE solution for customers who have challenges in providing secure access to systems and clouds from inside and outside the company.
Click here for details on Skyhigh Security

This time we will be on stage at BoF again!

JANOG53 BoF
The photo is from the JANOG53 meeting photo album.

As is the Company custom, this time we had Mr. Fujiwara and Mr. Arai from NTT Advanced Technology Corporation as well as Mr. Abeno and Mitamura from the Company, and the title was ``BoF to consider how to connect, clean, etc. the handling of optical transceivers.'' It was announced on . BoF stands for Birds of a Feather (a gathering of like-minded people), and it is a place where visitors can have hands-on discussions while actually touching the equipment and checking it out, rather than just giving a lecture. More than 150 people came to the large venue and were able to interact with the participants in the atmosphere unique to JANOG.

You can check the presentation materials and archive distribution of the day from the link below. We also introduced trouble cases that are not included in the distributed materials, so please also take a look at the archive broadcast, which will be available until 13:00 on February 29th. We will introduce more details in a separate article soon.

title

BoF thinking about how to handle optical transceivers such as connection and cleaning methods

date and time

Friday, January 19, 2024 13:30-14:30 (1 hour)

Presenter

NTT Advanced Technology Corporation Mr. Minoru Fujiwara, Mr. Kenta Arai

Macnica Ichiro Abeno, Tomoya Mitamura

Overview

(1) Internal structure of optical transceiver module and necessity of cleaning
We explained whether or not cleaning is possible depending on the connection method with the optical fiber cable.

(2)Cleaning tools and cleaning methods
We explained the specific method for cleaning the end face of an optical transceiver module and the tools to use.

(3) How to check the internal structure
Using an end-face inspection machine, we explained the differences in appearance depending on the type of optical transceiver module.

(4) General precautions when operating optical transceiver modules
In addition to end face cleaning, we explained general know-how regarding handling such as static electricity and input power.

(5) Hands-on cleaning and end face inspection
We conducted a hands-on session where customers could actually use the edge inspection machine.

 

*This BoF was conducted jointly with NTT-AT. the Company investigated the internal structure of the optical transceiver module, provided sample photos, and provided information such as past failure cases.

Details page

https://www.janog.gr.jp/meeting/janog53/optics/

(Archive distribution ends at 13:00 on February 29th)

Over 1000 people at the social gathering!

Tickets for this very popular social gathering sold out immediately. Members of the Company who won tickets participated, and it was a valuable opportunity to talk with people who we couldn't meet at the booth. The special menu tickets, which were first come first served, allowed you to choose from motsu nabe, Hakata ramen, sea bream chazuke, and nigiri sushi, and you could also enjoy gourmet food and shochu unique to local events.

JANOG53 social gathering

The next JANOG54 will be in Nara!

The content of Coherent exhibited at JANOG53 will be introduced in future seminars (scheduled for the end of March 2024) and articles. If you were unable to attend the event, please take a look.

The next event will be held at the Nara Prefecture Convention Center from July 3rd to 5th, 2024. the Company plans to continue exhibiting, and we look forward to seeing you again.

JANOG53 Macnica

Contact Us

If you would like to hear more about the content of this exhibition, have questions about the content of the lecture, or are interested in receiving an explanation even though you were unable to attend, please feel free to contact us here.