EPCS (Serial Configuration Device)
![]() |
Altera®'s new serial configuration devices are designed to deliver significant cost benefits in both the device and configuration ROM. Specifically engineered for maximum efficiency, these serial configuration devices offer numerous advanced features while minimizing costs. Providing features such as in-system programmability (ISP) and reprogramming capabilities at a lower cost than one-time programmable (OTP) devices, serial configuration devices offer a significant advantage over other configuration solutions. |
feature
- Industry top class low cost
- Flash memory access
- In-system programmability (ISP)
- small form factor
Using a serial configuration device makes configuring Altera FPGAs the easiest option. All of these Altera FPGAs can be configured with a single Altera configuration device.
FLASH memory access
Altera's serial configuration devices feature up to 64M bits of flash memory. Unused flash memory is available as general-purpose memory. Because this general-purpose memory can be accessed using a Nios or Nios II embedded processor (see diagram), the serial configuration device provides a complete solution combining flash memory and a configuration device.
This memory can also be used as a ROM for the boot loader program of the embedded processor, which reduces board space requirements, eliminates the need for additional onboard memory modules, and ultimately reduces overall system cost. can be reduced.
ISP (In-System Programmability)
All Altera serial configuration devices support ISP (In-System Programming). This feature enables in-system design updates, increasing design flexibility and streamlining the manufacturing process, thus reducing costs. The ISP functionality of serial configuration devices is supported by Altera's Active Serial Programming Interface (see diagram).
Small form factor to save board space
A key factor to consider when thinking about the total cost of a design is board space. The cost of a solution increases as the board space it consumes increases. Altera's serial configuration devices are packaged in 8-pin and 16-pin SOIC packages. The 8-pin package occupies less than 30 mm² of board space, resulting in the smallest board space required for an entire SOPC solution. Vertical migration is supported because all serial configuration devices use the same package.
Other configuration devices
・ EPC Enhanced Configuration ROM
