AQ-E1 is an AiryQonnect compatible terminal equipped with high-precision environmental sensors (temperature, humidity, carbon dioxide, TVOC gas, particles).
It is a terminal with a design that does not feel uncomfortable even if it is installed in offices, hotels, stores, etc.
Communication uses LTE (CAT-M1), and it can be used immediately after installation without complicated connection settings.
Product features
What you can do with the AQ-E1
Realization of a comfortable space with indoor air quality data that can be understood at a glance
It is possible to adjust to the optimal environment for living, working and studying
■ Countermeasures against infectious diseases such as coronavirus
Appropriate measures can be taken by monitoring CO2 concentration, temperature, and humidity, which are considered to be effective against viruses.
■Efficient air conditioning operation saves energy
By setting the space comfortably, you can save energy by suppressing wasted electricity.
■ Early fire detection
Early fire detection is possible by TVOC gas detection
*Cannot be used as a fire alarm by the Fire Service Act.
Use Case
Schools, offices, hospitals, stores, etc. are environments where it is difficult to avoid crowds. In such places, better ventilation is important for infectious disease control. In addition, as stipulated by WELL certification in offices and school environmental hygiene standards in schools, there are regulations for people to be comfortable. Environmental sensor terminals are also important for monitoring these standards.
specification
| item | AQ-E1 unit main specifications |
| Measurement function/performance | Temperature measurement range: -40°C to 120°C Measurement accuracy: Typ±0.2°C |
|
Humidity measurement range: 0 to 100%RH Measurement accuracy: Typ ±2.0% |
|
|
CO2 measurement range: 0ppm to 10,000ppm Measurement accuracy: ±(30ppm + 3%MV) |
|
|
TVOC measurement range: 0μg to 270,491μg/m3 Measurement accuracy: Typ±15%MV |
|
|
PM2.5 measurement range: 0-1000μg/m3 Measurement accuracy: 0-1000μg/m3: 10%MV |
|
|
Atmospheric pressure Measurement range: 300hPa to 1200hPa Measurement accuracy: ±3hPa |
|
|
Communication method |
LPWA (LTE-Cat.M1) with global support. |
|
data transfer rate |
Down-Link: 300Kbps / Up-Link: 375Kbps |
|
Communication protocol |
HTTPS assumed |
|
Operating environment |
Operating humidity: 0℃~50℃ / Operating humidity: 0%~95% (non-condensing) |
|
power consumption |
Rated DC: 5V, MAX: 1A or less |
|
Power supply method |
USB type-C power supply (5V) USB PD not supported |
|
External dimensions |
80mm x 180mm x 24mm |
|
housing material |
resin/aluminum plate |
|
Housing external specifications |
Sensor air intake: side and bottom of housing / Vent for heat dissipation: rear of housing / Power switch: bottom of housing |
|
liquid crystal display |
Display window: 12mm x 51mm TFT liquid crystal display TEMP(°C)/HUMI(%)/CO2(ppm)/TVOC(ppb)PM2.5(ug/m3)/BP(hPa) |
|
Installation method |
Indoor installation |
|
Installation bracket |
Bracket bracket (SPCC) Dimensions: 70mm x 25mm |
|
weight |
about 500g |
|
product design |
Sustainable Design Institute Co., Ltd. |
|
equipment manufacturer |
Watty Corporation |