Narrow down by specifying conditions
There are currently 4292 hits.
When implementing Nios II with Qsys and trying to create a new BSP with Nios II SBT, the following error occurs. What are the possible causes?
<Error message>
SEVERE: [Error] altera_hal_linkerx_generator: Required linker section mappings do not exist: "[.exceptions]"
SEVERE: [Error] altera_hal_linkerx_generator: Required linker section mappings do not exist: "[.exceptions]"
SEVERE: nios2-bsp-create-settings failed.
nios2-bsp: nios2-bsp-create-settings failed nios2-bsp hal . <file path>/file_name.sopcinfo
--cpu-name cpu_0 failed
Executing: nios2-bsp-editor (C:\altera\<version>\nios2eds\bin)
Executing: nios2-bsp-editor (C:\altera\<version>\nios2eds\bin)
Category: Nios® II
Tools: Nios II EDS
device:-
It is possible that the Exception Vector in the Nios II core settings is set to the Nios II core's debug module instead of memory.
Select memory (RAM) such as on-chip memory for Exception Vector.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.