Is it necessary to regenerate U-boot/U-boot dts when changing SDRAM-related parameters (Hard Memory Controller (HMC) settings) on Arria 10 SoC?

Narrow down by specifying conditions

There are currently 4341 results.

Is it necessary to regenerate U-boot/U-boot dts when changing SDRAM related parameters (Hard Memory Controller (HMC) settings) in Arria 10 SoC?

Arria SoC FPGAs SoC EDS/DS-5

Category: SoCs
Tools: SoC EDS
Device: Arria® 10

Regeneration is required.
In detail, only U-boot needs to be regenerated, U-boot dts is not needed.

Please use the rebuilt U-boot binary because there are places in U-boot that refer to and set parameters related to SDRAM.
There is no difference in the U-boot dts file, so you can use the same one even after changing the SDRAM parameters.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search