Characteristic:

Gasket type shield material that can be surface mounted. It simplifies work such as connecting the PCB and housing and inserting gaskets that were previously done manually. PCB reflow is possible.

Main Specifications:

・Size: L:4 x W:3 x H:2.5 ~ L:10 x W10 x L15

・Surface resistance: 0.1Ω/sq

・Shield effect: Attenuation 70dB @100MHz

⇒ Click here for details

Characteristic:

Chip beads for large current. By lowering the DC resistance value and molding with a special material, a maximum rated current of 10A is achieved with a chip bead inductor. Effective as an alternative to bead ferrite inductors that may burn out due to inrush current. In addition, the low DC resistance can reduce unnecessary losses in the circuit. As shown in the figure below, data such as "pulse time vs. maximum pulse current" and "maximum current vs. number of pulses" are also shown, enabling safe design against peak currents that occur under various conditions.

Main Specifications:

・Size: 0603 (1608mm) to 3312 (8530mm)

・DC resistance value: Minimum 1mΩ

・Rated current: Max. 10.5A

・Impedance: 600Ω@100MHz (@100MHz maximum value)

⇒ Click here for details

Characteristic:

Compared to common mode choke coils that use conventional ferrite cores such as "NiZn" and "MnZn", this product is characterized by "small size", "light weight" and "low loss". From the comparison table below, it can be seen that the magnetic permeability μ is a large value compared to other materials. Since the magnetic permeability is high, inductance can be obtained with a small number of turns, and Rdc is also small, resulting in low loss. In terms of temperature characteristics, one of the features is that a stable inductance value can be maintained in a high-temperature environment. It can be realized with about 50% miniaturization in volume ratio and Rdc less than half.

Main Specifications:

・Size: XS ~ XXL 5 types

・Frequency: Can be used in a wide range of frequencies from low frequencies to several 100MHz

・Rated current: Maximum 38A

⇒ Click here for details

Characteristic:

EMI sheet with thermal conductivity. Effective for high-speed CPU heat dissipation and EMI countermeasures.

Main Specifications:

・Size: 20mm square to 300mm square

・ Thickness: 1 to 3 mm

・Supported frequency: 1MHz to 3GHz

・Temperature: Maximum 160℃

⇒ Click here for details

Characteristic:

Multilayer ceramic capacitors (MLCC) with enhanced vibration and shock performance. By providing a layer that functions as an absorber on the electrodes on both ends, the structure is stronger against vibration and shock than conventional MLCCs. It is most suitable for the circuit to be mounted on the handy device.

Main Specifications:

・Size: 0603 (1608 mm) to 1210 (3225 mm)

・Capacity: Various

⇒ Click here for details

Characteristic:

An online tool for searching coils, ferrites, capacitors and more. Simply enter your criteria and search to instantly see products that meet your criteria. It is a useful tool for selecting the most suitable parts, such as comparing the characteristics of multiple candidate parts with waveforms on the same screen, and checking data sheets for more detailed information. Simulations such as inductor loss calculation, heat generation, saturation current, DC superimposition characteristics, and impedance detection of coils and ferrites can be used simply by accessing the REDEXPERT site on the browser.

⇒ Click here for details