The AD4858 is a 20-bit, 1 MSPS data acquisition system (DAS) that samples 8 channels simultaneously with full buffers. Features differential inputs with wide common-mode voltage range. It operates from a 5V low voltage supply, a flexible input buffer supply, and uses a precision, low-drift internal reference and reference buffer. The AD4858 allows each channel's SoftSpan range to be independently set to match the application's native signal amplitude, minimizing additional external signal conditioning. To further maximize single conversion dynamic range, the AD4858 incorporates seamless high dynamic range (SHDR) technology. When enabled, the channel's input signal path gain is automatically optimized on a sample-by-sample basis, minimizing converter noise for each sample without affecting linearity.
*Manufacturer product page: AD4858

■ Application
・ATE (Automatic Test Equipment)
・Avionics (avionics) and aerospace
・Measuring instruments and control systems
・Semiconductor manufacturing
・Testing and measurement

■ Evaluation board
・ EVAL-AD4858

The ADMX3652 is a 6½-digit digital voltmeter (DVM) with fast throughput (1kSPS), flexible measurement methods (manual or automatic range selection), and reliable results (25ppm measurement accuracy on 2V range for 90 days). We provide. The ADMX3652 provides a compact solution with the most common DVM measurements. They are popular and commonly used by engineers because they are simple, reliable, and small devices that save system space for long measurement times, high integration, and high precision applications.
*Manufacturer product page: ADMX3652

■ Application
・High precision voltage measurement
・Industrial automatic testing

■ Evaluation board
・ EVAL-ADMX3652

The ADA4351-2 is a compact, monolithic, dual-channel, precision programmable gain transimpedance amplifier (PGTIA). A revolutionary solution for accurately measuring small currents over a wide dynamic range. Accuracy is maintained over a wide temperature range from −40°C to +125°C, and final equipment calibration only needs to be performed once at room temperature, saving test time and cost. Two low off-leakage switches per channel and gain programmable using two user-selectable external resistors provide a compact, flexible, full-featured PGTIA solution . Separate analog and digital supplies allow the ADA4351-2 amplifier to operate from bipolar supplies. Meanwhile, integrated logic level shifting allows digital interfaces to maintain a ground reference. Additionally, the robust, low-noise output stage allows the ADA4351-2 to directly drive 16-bit analog-to-digital converters (ADCs such as the AD4696). This allows you to build a complete analog front end (AFE) to address especially challenging precision current measurement applications.
*Manufacturer product page: ADA4351-2

■ Application
・Convert current to voltage (from I to V) with high accuracy
・Programmable gain TIA
・Photodetector interface and amplification
・Optical network equipment
・Optical power measurement
・Instrument spectroscopy and chromatography
・High-precision data acquisition system (DAQ)

■ Evaluation board
・ EVAL-ADA4351-2

The MAX96724/F/R deserializer converts four GMSL™ 2/1 inputs to 1, 2, or 4 MIPI D-PHY or C-PHY outputs. Simultaneous bidirectional communication is possible using 50Ω coaxial cable or 100Ω STP cable that meets GMSL channel specifications. Supports up to four remotely located sensors using industry standard coax or STP interconnects. Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the forward direction and 187.5Mbps in the reverse direction. It supports both video data aggregation and reproduction, allowing streams from multiple remotely located sensors to be combined and routed to one or more available CSI-2 outputs.
*Manufacturer product page: MAX96724

■ Application
・High resolution camera system
・Advanced driver assistance system (ADAS)

■ Evaluation board
・ MAX96724-BAK-EVK#
・ MAX96724R-BAK-EVK#
・ MAX96724F-BAK-EVK#
・ AD-GMSLCAMRPI-ADP#

The ADuM1252/3 provides two open-drain channels (one unidirectional and one bidirectional) for applications such as I2C that need to send data in both directions on the same line but have a unidirectional clock. ). To prevent latch-up operation, the side 1 output has a special buffer that regulates the logic-low voltage to 0.64V, and the input logic-low threshold is at least 50mV lower than the output logic-low voltage. Become. Side 2 has a conventional buffer that does not regulate the logic-low output voltage.
*Manufacturer product page: ADuM1252 / ADuM1253

■ Application
・Isolated I2C/SMBus interface
・Battery management system
・Power over Ethernet (PoE)
・Motor control system

■ Evaluation board
・ADuM1252SEVKIT

The MAX14916 and MAX14916A feature eight high-side switches with an on-resistance of only 120mΩ (typical) or 250mΩ (maximum) at 125°C ambient temperature. Each channel is specified to handle up to 1.1A (MAX14916) or 1.5A (MAX14916A) continuous current. Similarly, two adjacent channels can be driven together to form four 2.4A (MAX14916) or 3A (MAX14916A) switches.
*Manufacturer product page: MAX14916 / MAX14916A

■ Application
・Industrial digital output
・PLC system

■ Evaluation board
・ MAX14916PMB
・ MAX14916EVKIT

The ADL5308 is a transimpedance log amplifier optimized for wide dynamic range signal level monitoring in fiber optic systems. Produces an accurate temperature compensated output voltage proportional to the logarithm of the ratio of the input current to the reference current at the INP pin. The reference current can be generated internally or supplied externally through the IREF interface (log ratio sensing). Both the logarithmic slope and intercept are precisely adjusted to their nominal values (200mV/decade and 10pA, respectively).
*Manufacturer product page: ADL5308

■ Application
・Optical power monitoring
・Erbium-doped optical amplifier (EDFA)

■ Evaluation board
・EVAL-ADL5308

The LTC9101-2A/LTC9102 chipset is a up to 48-port Power Sourcing Device (PSE) controller designed for use in IEEE 802.3at Type 1/2 compliant Power over Ethernet (PoE) systems. Designed to power 802.3af and 802.3at compliant PDs. Low RDS(ON) external MOSFETs and 0.1Ω sense resistors for each power channel provide the industry's lowest heat dissipation. Transformer-isolated communication protocols replace expensive optocouplers and complex isolated 3.3V power supplies, resulting in significant bill-of-materials (BOM) cost savings.
*Manufacturer product page: LTC9101-2A

■ Application
・PoE PSE switches/routers and midspans

■ Evaluation board
・ EVAL-LTC9101-2A

The ADGM1121 is a wideband, double-pole, double-throw (DPDT) switch manufactured using Analog Devices micro-mechanical (MEMS) switch technology. This technology enables switches with small form factors, wide RF bandwidth, high linearity, low insertion loss, and operation down to 0Hz/DC. This switch is an ideal solution when wide RF range and precision equipment switching is required.
*Manufacturer product page: ADGM1121

■ Application
・ATE load and probe board
・DC during high-speed loopback test
・High-speed SerDes, PICe Gen4/5, USB4, PAM4
・Relay replacement
・Reconfigurable filter/attenuator
・Defense radio and microwave radio
・Cellular infrastructure: 5G mmWave

■ Evaluation board
・ EVAL-ADGM1121