Overview
HDMI 2.0 Tx/Rx IP is an IP core that adds transmit/receive functions compliant with the HDMI 2.0 standard to Intel® FPGA. Maximum roll
4k2k@60p video data can be sent and received at a transmission rate of 18Gbps and RGB24bit.
By using this IP core, users will be able to quickly launch products conforming to the HDMI 2.0 standard to the market.
Features
- Enables HDMI 2.0 transmission and reception with Intel® FPGA
- Maximum transfer rate 18Gbps, 4k2k@60p transmission/reception possible with RGB24bit (however, it depends on the applied FPGA)
- HDMI 3rd Party Compliance Test Confirmed to Work
specification
- Supports DVI mode
- Supports Deep Color (30 bit/36 bit/48 bit) mode
- Supports Display Data Channel (DDC), Status and Control Data Channel (SCDC) control
- Supports Hot Plug Detect and +5V Power Drive control
- Compatible with Audio
*1: The following functions are not supported by this product.
Content protection
*2: The following functions must be provided outside this IP.
Consumer Electronics Control (CEC)
HDMI Ethernet and Audio Return Channel (HEAC)
corresponding device
- Cyclone® V GX (bandwidth limited)
- Cyclone® 10GX
- Arria® V GX (bandwidth limited)
- Arria® 10 GX
* Please contact our sales office for the compatibility status of devices other than the above.
Offerings
- Cryptographic RTL (Verilog HDL)
- Reference design
- Simulation environment (for ModelSim)
- User's Manual, Reference Manual, Simulation Manual
logic resource
*The above values are approximate circuit scale values based on implementation examples. It may vary depending on the customer's system configuration.
Evaluation environment
The receiving IP receives the video output from the 4K player, and the sending IP outputs the video to the 4K monitor.
| Category | Product Name | Vendors |
| Base board | Arria® 10 GX FPGA Development Board | Intel® |
| Daughter Card | HDMI 2.0 Interface Card | Mpression |
HDMI 2.0 Interface Card
OR
